3dprinting/duet_vcore3
3dprinting/duet_vcore3
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Add tool definition, set correct orientation to E0 stepper

Browse Source
This commit is contained in:
root 2021-05-30 10:18:43 +00:00
parent 6eec0b6c4a
commit 32d393afcb
1 changed files with 7 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
config.g
View File

@ -14,7 +14,7 @@ M569 P0.1 S0 D3 ; physical drive 0.1 goes backwards
M569 P0.2 S0 D3 ; physical drive 0.2 goes backwards M569 P0.2 S0 D3 ; physical drive 0.2 goes backwards
M569 P0.3 S1 D3 ; physical drive 0.3 goes forwards M569 P0.3 S1 D3 ; physical drive 0.3 goes forwards
M569 P0.4 S1 D3 ; physical drive 0.4 goes forwards M569 P0.4 S1 D3 ; physical drive 0.4 goes forwards
M569 P0.5 S1 D3 ; physical drive 0.5 goes forwards M569 P0.5 S0 D3 ; physical drive 0.5 goes backwards
M584 X0.4 Y0.3 Z0.0:0.1:0.2 E0.5 ; set drive mapping M584 X0.4 Y0.3 Z0.0:0.1:0.2 E0.5 ; set drive mapping
M350 X16 Y16 Z16 E16 I1 ; configure microstepping with interpolation M350 X16 Y16 Z16 E16 I1 ; configure microstepping with interpolation
@ -49,14 +49,14 @@ M950 H0 C"out1" T0 ; create bed heater output on
M307 H0 B0 S1.00 ; disable bang-bang mode for the bed heater and set PWM limit M307 H0 B0 S1.00 ; disable bang-bang mode for the bed heater and set PWM limit
M140 H0 ; map heated bed to heater 0 M140 H0 ; map heated bed to heater 0
M143 H0 S120 ; set temperature limit for heater 0 to 120C M143 H0 S120 ; set temperature limit for heater 0 to 120C
M307 H0 A303.1 C356.7 D1.4 S1.00 V24.0 B0 ; PID tune for "Bed" ;M307 H0 A303.1 C356.7 D1.4 S1.00 V24.0 B0 ; PID tune for "Bed"
;; HotEnd ;; HotEnd
M308 S1 P"temp1" Y"thermistor" T100000 B4725 C7.060000e-8 A"Hotend" ; configure sensor 1 as thermistor on pin temp1 M308 S1 P"temp1" Y"thermistor" T100000 B4725 C7.060000e-8 A"Hotend" ; configure sensor 1 as thermistor on pin temp1
M950 H1 C"out2" T1 ; create nozzle heater output on out2 and map it to sensor 1 M950 H1 C"out2" T1 ; create nozzle heater output on out2 and map it to sensor 1
M307 H1 B0 S1.00 ; disable bang-bang mode for heater and set PWM limit M307 H1 B0 S1.00 ; disable bang-bang mode for heater and set PWM limit
M143 H1 S280 ; set temperature limit for heater 1 to 280C M143 H1 S250 ; set temperature limit for heater 1 to 250C
M307 H1 A751.5 C196.6 D4.7 S1.00 V23.9 B0 ; run PID tune for Hotend ;M307 H1 A751.5 C196.6 D4.7 S1.00 V23.9 B0 ; run PID tune for Hotend
; Fans ; Fans
M950 F0 C"out7" Q500 ; create fan 0 on pin out7 and set its frequency M950 F0 C"out7" Q500 ; create fan 0 on pin out7 and set its frequency
@ -65,7 +65,7 @@ M950 F1 C"out4" ; create fan 1 on pin out4
M106 P1 C"Layer fan" S1 H-1 ; set fan 1 value. Thermostatic control is turned off M106 P1 C"Layer fan" S1 H-1 ; set fan 1 value. Thermostatic control is turned off
; Tools ; Tools
M563 P0 D0 H1 F0:1 ; define tool 0 M563 P0 D0 H1 F1 ; define tool 0
G10 P0 X0 Y0 Z0 ; set tool 0 axis offsets G10 P0 X0 Y0 Z0 ; set tool 0 axis offsets
G10 P0 R0 S0 ; set initial tool 0 active and standby temperatures to 0C G10 P0 R0 S0 ; set initial tool 0 active and standby temperatures to 0C
@ -74,6 +74,6 @@ G10 P0 R0 S0 ; set initial tool 0 active a
; Miscellaneous ; Miscellaneous
M575 P1 S1 B57600 ; enable support for PanelDue M575 P1 S1 B57600 ; enable support for PanelDue
M501 ; load saved parameters from non-volatile memory M501 ; load saved parameters from non-volatile memory
M911 S10 R11 P"M913 X0 Y0 G91 M83 G1 Z3 E-5 F1000" ; set voltage thresholds and actions to run on power loss M911 S10 R11 P"M913 X0 Y0 G91 M83 G1 Z3 E-5 F1000" ; set tension thresholds and actions to run on power loss
M404 N1.75 D0.4 ; Filament width and nozzle diameter M404 N1.75 D0.4 ; Filament width and nozzle diameter
T0 ; Define default tool