Update READM.md

README.md

@@ -1,8 +1,70 @@
-# Duet 3 6HC 
+# Vcore3 500^3
 
 ## HW Config
+#####
+- 1x [Duet 3 6HC](https://www.123-3d.nl/Duet3D-Duet-3-Mainboard-6HC-v1-0-origineel-Duet-3-MB6HC-v1-00-i4602.html)
+##### Display
+- 1x [Duet panel Due](https://www.123-3d.nl/Duet3D-PanelDue-met-7-v1-0-display-kabel-PanelDue-7i-v1-0-i3018-t14808.html)
+##### SBC
+- 1x [PI 4 2GB](https://www.123-3d.nl/RaspberryPi-Raspberry-Pi-4-model-B-2-GB-i4908-t16066.html)
 
-### Pins
+##### Power supply
+- 1x Meanwell 400W 24v
+
+##### Steppers
+- 3x z [0.9 nema 17](https://www.123-3d.nl/123-3D-NEMA17-stappenmotor-0-9-graden-per-stap-48-mm-lang-4-2-kg-cm-SL42S248MA108-0524-i3420-t14804.html) 
+- 1x x 0.9 nema 17
+- 1x y 0.9 nema 17
+- 1x extruder [0.9 nema 17 pancake](https://www.ratrig.com/nema-17-stepper-motor-slimline.html)
+
+##### Carriage
+- 1x [Eva 2.0](https://main.eva-3d.page/)
+
+##### HotEnd
+- 1x [E3D V6](https://www.123-3d.nl/E3D-v6-hotend-complete-kit-1-75-mm-24V-thermistor-cartridge-origineel-i2184-t13151.html)
+- 1x [Bondtech BMG Extruder](https://www.123-3d.nl/Bondtech-BMG-Extruder-EXT-BMG-i3776-t15696.html)
+##### Lighting
+- 1x [SSR 40A DC-DC](https://www.la3d.ch/e-shop/relais-ssr-creality-3d-cr-10s-pro/))
+- 2x [Led strips 24v 50cm](https://www.amazon.nl)
+
+Note: The usage of the SSR allows more lighting to be added without worries for curruent usage on the board.
+ 
+##### Fans
+- 1x [STD ratrig layer fan 24v](https://www.ratrig.com/fan-50mm-blower-type-24v-dc.html)
+- 1x [STD ratrig tool fan 24v](https://www.ratrig.com/3d-printing-cnc/3d-printer-kits/accessories/fan-40mm-brushless-24v-dc.html)
+
+##### Bed heater
+
+##### Bed calibration tool
+- 1x [Bltouch 3.1](https://www.123-3d.nl/Antclabs-BLTouch-Auto-Bed-Leveling-Sensor-v3-1-BLTOUCH-i3640-t16885.html)
+
+##### Endstops
+- 2x [Ratrig std end stops](https://www.ratrig.com)
+
+##### Bed
+- 1x [C-Lin SSR](https://www.ratrig.com/hardware2/electronics/clin-ssr-40a-relay.html)
+- 1x [Keenovo heating element](https://www.ratrig.com/hardware2/electronics/heater-bed-pad-keenovo-500-x-500mm-220v-1600w.html)
+
+##### Filament sensor
+1x [Duet 3d - laser sensor](https://www.123-3d.nl/Duet3D-Laser-Filament-Monitor-LaserFilamentMonitor-i3121-t14808.html)
+
+### Software
+#### Base intall
+[Duet light](https://pkg.duet3d.com/DuetPi-lite.zip) - Config [link](https://duet3d.dozuki.com/Wiki/SBC_Setup_for_Duet_3)
+#### Git config && software deployment
+```
+apt-get update && apt-get upgrade && apt-get install git
+mv /opt/dsf/sd/sys /opt/dsf/sd/sys.ori
+cd /opt ; git clone https://g.lgeex.com/pedro/duet_vcore3.git
+mv /opt/dsf/sd/macros /opt/dsf/sd/macros.ori
+chown -R dsf:dsf /opt/duet_vcore3
+chmod -R g+s /opt/duet_vcore3 
+setfacl -R -d -m u::rwx /opt/duet_vcore3
+ln -s /opt/duet_vcore3 /opt/dsf/sd/sys
+ln -s /opt/duet_vcore3/macros /opt/dsf/sd/macros
+```
+
+### Duet 3 6HC - Pins
 
 #### IO
 Used IO pin headers
@@ -38,6 +100,9 @@ Thermal probes in use:
 * temp0 - Bed thermistor
 * temp1 - Hotend thermistor
 
+## TODO
+- Setup filament sensor
+
 ## Useful links
 * [GCode library](https://duet3d.dozuki.com/Wiki/Gcode)
 * [RatRig vcore3 docs](https://ratrig.dozuki.com/c/Rat_Rig_V-Core_3)