3dprinting/duet_vcore3
3dprinting/duet_vcore3
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

New defaults for EVA 2.2

Browse Source
This commit is contained in:
pedro 2022-02-01 17:54:16 +00:00
parent 765dbe268c
commit 5a747e0740
5 changed files with 27 additions and 28 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
bed.g
View File

@ -5,9 +5,9 @@
M561 ; clear any bed transform
G30 P0 X20 Y20 Z-99999 ; probe near a leadscrew
G30 P1 X252.5 Y480 Z-99999 ; probe near a leadscrew
G30 P2 X480 Y20 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors
G30 P5 X65 Y0 Z-99999 ; probe near a leadscrew
G30 P1 X252.5 Y450 Z-99999 ; probe near a leadscrew
G30 P2 X450 Y0 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors
M280 P0 S160 ; clear and reset BL touch
;G29 ; probe the bed and enable compensation

33
config.g
View File

@ -18,33 +18,32 @@ M569 P0.5 S0 D3 H50 V50 ; physical drive 0.5 goes backwar
M584 X0.3 Y0.4 Z0.0:0.1:0.2 E0.5 ; set drive mapping
M350 X16 Y16 Z16 E16 I1 ; configure microstepping with interpolation
M92 X80.00 Y80.00 Z1600.00 E835 ; set steps per mm
M566 X400.00 Y400.00 Z6.00 E120.00 P1 ; set maximum instantaneous speed changes (mm/min)
M203 X10800.00 Y10800.00 Z1000.00 E3600.00 ; set maximum speeds (mm/min)
M201 X3000.00 Y3000.00 Z3000.00 E3600.00 ; set accelerations (mm/s^2)
M906 X2000 Y2000 Z1200 E800 I30 ; set motor currents (mA) and motor idle factor in per cent
M84 S30 ; Set idle timeout
M92 X80.00 Y80.00 Z1600.00 E835 ; set steps per mm
M566 X400.00 Y400.00 Z6.00 E120.00 P1 ; set maximum instantaneous speed changes (mm/min)
M203 X20800.00 Y20800.00 Z1000.00 E3600.00 ; set maximum speeds (mm/min)
M201 X6000.00 Y6000.00 Z3000.00 E3600.00 ; set accelerations (mm/s^2)
M906 X2000 Y2000 Z1200 E800 I20 ; set motor currents (mA) and motor idle factor in per cent
M84 S30 ; Set idle timeout
; Axis Limits
M208 X5 Y5 Z0 S1 ; set axis minima
M208 X495 Y495 Z500 S0 ; set axis maxima
M208 X5 Y5 Z0 S1 ; set axis minima
M208 X500 Y500 Z500 S0 ; set axis maxima
; Endstops
M574 X1 S1 P"io2.in" ; configure active-high endstop
M574 Y2 S1 P"io1.in" ; configure active-high endstop
M574 X1 S1 P"io2.in" ; configure active-high endstop
M574 Y2 S1 P"io1.in" ; configure active-high endstop
; Z-Probe
M950 S0 C"io7.out" ; create servo pin 0 for BLTouch
M558 P9 C"^io7.in" H3 F250 T12000 A3 ; set Z probe type to bltouch and the dive height + speeds, run probing 3x
M950 S0 C"io7.out" ; create servo pin 0 for BLTouch
M558 P9 C"^io7.in" H3 F250 T12000 A3 ; set Z probe type to bltouch and the dive height + speeds, run probing 3x
;; Pay special attention to the values bellow on G31, the Z value needs to be validated for your printer
;; Start with something like 0.5
;; Documentation available: https://duet3d.dozuki.com/Wiki/Test_and_calibrate_the_Z_probe
G31 P500 X-27.5 Y-13 Z2.1 ; set Z probe trigger value, offset and trigger height
G31 P500 X-30 Y-0.5 Z2.1 ; set Z probe trigger value, offset and trigger height
;;
M671 X506.5:250:-2.5 Y0:508.5:0 S6 ; define positions of Z leadscrews or bed levelling screws
M557 X5:470 Y15:465 P15 ; define 12x12 mesh grid
M671 X-12.5:250:506.5 Y-12.5:508.5:-12.5 S6 ; define positions of Z leadscrews or bed levelling screws
M557 X30:470 Y30:470 P11 ; define 11x11 mesh grid
; Heaters
;; BED
@ -86,5 +85,5 @@ M575 P1 S1 B57600 ; enable support for PanelDue
M501 ; load saved parameters from non-volatile memory
M911 S10 R11 P"M913 X0 Y0 G91 M83 G1 Z3 E-5 F1000" ; set tension thresholds and actions to run on power loss
M404 N1.75 D0.4 ; Filament width and nozzle diameter
;M572 D0 S0.10 ; Pressure Advance
;M572 D0 S0.10 ; Pressure Advance
T0 ; Define default tool

4
homeall.g
View File

@ -8,7 +8,7 @@ M280 P0 S90 ; Ensure the pin is raised
G91 ; relative positioning
G1 H2 Z2 F10800 ; lift Z relative to current position
G1 H1 X-625 F1800 ; move quickly to X axis endstop and stop there (first pass)
G1 H1 X-625 F10800 ; move quickly to X axis endstop and stop there (first pass)
G1 H2 X10 F6000 ; go back a few mm
G1 H1 X-625 F256 ; move slowly to X axis endstop once more (second pass)
G90 ; absolute positioning
@ -16,7 +16,7 @@ G1 X10 F6000 ; move forward 10mm
G91 ; relative positioning
G1 H2 Z2 F10800 ; lift Z relative to current position
G1 H1 Y625 F1800 ; move quickly to Y axis endstop and stop there (first pass)
G1 H1 Y625 F10800 ; move quickly to Y axis endstop and stop there (first pass)
G1 Y-10 F6000 ; go back a few mm
G1 H1 Y625 F256 ; move slowly to Y axis endstop once more (second pass)
G90 ; absolute positioning

6
homex.g
View File

@ -4,9 +4,9 @@
G91 ; relative positioning
G1 H2 Z2 F10800 ; lift Z relative to current position
G1 H1 X-625 F3600 ; move quickly to X axis endstop and stop there (first pass)
G1 H1 X-625 F10800 ; move quickly to X axis endstop and stop there (first pass)
G1 H2 X5 F6000 ; go back a few mm
G1 H1 X-625 F360 ; move slowly to X axis endstop once more (second pass)
G1 H1 X-625 F256 ; move slowly to X axis endstop once more (second pass)
;G1 H2 Z-2 F10800 ; lower Z again
G90 ; absolute positioning
G1 X10 F6000 ; move forward 10mm
G1 X10 F10800 ; move forward 10mm

6
homey.g
View File

@ -4,9 +4,9 @@
G91 ; relative positioning
G1 H2 Z2 F10800 ; lift Z relative to current position
G1 H1 Y625 F3600 ; move quickly to Y axis endstop and stop there (first pass)
G1 H1 Y625 F10800 ; move quickly to Y axis endstop and stop there (first pass)
G1 Y-10 F6000 ; go back a few mm
G1 H1 Y625 F360 ; move slowly to Y axis endstop once more (second pass)
G1 H1 Y625 F256 ; move slowly to Y axis endstop once more (second pass)
;G1 H2 Z-2 F10800 ; lower Z again
G90 ; absolute positioning
G1 Y10 F6000 ; move forward 10 mm
G1 Y10 F10800 ; move forward 10 mm