3dprinting/duet_vcore3
3dprinting/duet_vcore3
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Tune bed probing after nozzle change

Browse Source
This commit is contained in:
pedro 2021-06-27 18:22:12 +01:00
parent 73e398c2fd
commit 5bad296a0e
2 changed files with 6 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
bed.g
View File

@ -6,7 +6,7 @@
M561 ; clear any bed transform
G30 P0 X20 Y20 Z-99999 ; probe near a leadscrew
G30 P1 X250 Y480 Z-99999 ; probe near a leadscrew
G30 P1 X252.5 Y480 Z-99999 ; probe near a leadscrew
G30 P2 X480 Y20 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors
M280 P0 S160 ; clear and reset BL touch

10
config.g
View File

@ -22,7 +22,7 @@ M92 X160.00 Y160.00 Z1600.00 E835 ; set steps per mm
M566 X400.00 Y400.00 Z6.00 E120.00 P1 ; set maximum instantaneous speed changes (mm/min)
M203 X10800.00 Y10800.00 Z1000.00 E3600.00 ; set maximum speeds (mm/min)
M201 X3000.00 Y3000.00 Z3000.00 E3600.00 ; set accelerations (mm/s^2)
M906 X1600 Y1600 Z1600 E800 I30 ; set motor currents (mA) and motor idle factor in per cent
M906 X1500 Y1500 Z1000 E800 I30 ; set motor currents (mA) and motor idle factor in per cent
M84 S30 ; Set idle timeout
; Axis Limits
@ -36,15 +36,15 @@ M574 Y2 S1 P"io1.in" ; configure active-high endst
; Z-Probe
M950 S0 C"io7.out" ; create servo pin 0 for BLTouch
M558 P9 C"^io7.in" H3 F250 T12000 ; set Z probe type to bltouch and the dive height + speeds
M558 P9 C"^io7.in" H3 F250 T12000 A3 ; set Z probe type to bltouch and the dive height + speeds, run probing 3x
;; Pay special attention to the values bellow on G31, the Z value needs to be validated for your printer
;; Start with something like 0.5
;; Documentation available: https://duet3d.dozuki.com/Wiki/Test_and_calibrate_the_Z_probe
G31 P500 X-28 Y-13 Z2.360 ; set Z probe trigger value, offset and trigger height
G31 P500 X-27.5 Y-13 Z2.05 ; set Z probe trigger value, offset and trigger height
;;
M671 X506.5:250:-2.5 Y0:508.5:0 S6 ; define positions of Z leadscrews or bed levelling screws
M557 X15:465 Y15:465 P15 ; define 15x15 mesh grid
M557 X50:450 Y50:450 P12 ; define 12x12 mesh grid
; Heaters
;; BED
@ -87,5 +87,5 @@ M575 P1 S1 B57600 ; enable support for PanelDue
M501 ; load saved parameters from non-volatile memory
M911 S10 R11 P"M913 X0 Y0 G91 M83 G1 Z3 E-5 F1000" ; set tension thresholds and actions to run on power loss
M404 N1.75 D0.4 ; Filament width and nozzle diameter
M572 D0 S0.10 ; Pressure Advance
;M572 D0 S0.10 ; Pressure Advance
T0 ; Define default tool