3dprinting/duet_vcore3
3dprinting/duet_vcore3
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Enable pressure advance, tune Z, tune E steps

Browse Source
This commit is contained in:
pedro 2021-06-12 23:27:58 +01:00
parent 2773198f50
commit 7b6037d91a
1 changed files with 3 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
config.g
View File

@ -18,7 +18,7 @@ M569 P0.5 S0 D3 H50 V50 ; physical drive 0.5 goes backwar
M584 X0.3 Y0.4 Z0.0:0.1:0.2 E0.5 ; set drive mapping
M350 X16 Y16 Z16 E16 I1 ; configure microstepping with interpolation
M92 X160.00 Y160.00 Z1600.00 E833.32 ; set steps per mm
M92 X160.00 Y160.00 Z1600.00 E820 ; set steps per mm
M566 X400.00 Y400.00 Z6.00 E120.00 ; set maximum instantaneous speed changes (mm/min)
M203 X10800.00 Y10800.00 Z1000.00 E1600.00 ; set maximum speeds (mm/min)
M201 X3000.00 Y3000.00 Z100.00 E3600.00 ; set accelerations (mm/s^2)
@ -40,7 +40,7 @@ M558 P9 C"^io7.in" H3 F500 T12000 ; set Z probe type to bltouch
;; Pay special attention to the values bellow on G31, the Z value needs to be validated for your printer
;; Start with something like 0.5
;; Documentation available: https://duet3d.dozuki.com/Wiki/Test_and_calibrate_the_Z_probe
G31 P500 X-28 Y-13 Z2.235 ; set Z probe trigger value, offset and trigger height
G31 P500 X-28 Y-13 Z2.225 ; set Z probe trigger value, offset and trigger height
;;
M671 X-4.5:250:504.5 Y-4.52:505:-4.52 S5 ; define positions of Z leadscrews or bed levelling screws
M557 X25:475 Y25:475 P10 ; define 10x10 mesh grid
@ -82,4 +82,5 @@ M575 P1 S1 B57600 ; enable support for PanelDue
M501 ; load saved parameters from non-volatile memory
M911 S10 R11 P"M913 X0 Y0 G91 M83 G1 Z3 E-5 F1000" ; set tension thresholds and actions to run on power loss
M404 N1.75 D0.4 ; Filament width and nozzle diameter
M572 D0 S0.10 ; Pressure Advance
T0 ; Define default tool