Update README.md with latest info

README.md

@@ -31,7 +31,8 @@ Pay special attention to the stepper direction and stepper step/angle, these are
 - 1x [PI 4 2GB](https://www.123-3d.nl/RaspberryPi-Raspberry-Pi-4-model-B-2-GB-i4908-t16066.html)
 
 ##### Power supply
-- 1x Mean well 400W 24v ([RSP-500-24](https://eu.mouser.com/ProductDetail/MEAN-WELL/RSP-500-24?qs=8uyp%2Fy7yFW5FrdkZCZycgg==))
+- 1x Mean well 400W 24v - ([RSP-500-24](https://eu.mouser.com/ProductDetail/MEAN-WELL/RSP-500-24?qs=8uyp%2Fy7yFW5FrdkZCZycgg==))
+- 1x Mean well 50w 5v - [LRS-50-5](https://www.meanwell-web.com/en-gb/ac-dc-single-output-enclosed-power-supply-lrs--50--5) 
 
 ##### Steppers
 - 3x z [0.9 nema 17](https://www.123-3d.nl/123-3D-NEMA17-stappenmotor-0-9-graden-per-stap-48-mm-lang-4-2-kg-cm-SL42S248MA108-0524-i3420-t14804.html) 
@@ -45,7 +46,7 @@ Pay attention to currents and number of steps while configuring your printer.
 Note: the stepper except the pancake one have the following specs:
 ``` 
 Draaddikte: 	24 Awg 	Aantal draden: 	4
-Nominale stroom: 	1,7 A 	Weerstand: 	1,8 Ω
+Nominale stroom: 1,7 A 	Weerstand: 	1,8 Ω
 Afmetingen: 	42,3 x 42,3 x 48 mm (LxBxH) 	As diameter: 	5 mm
 Voltage: 	3,1 V 	Stap hoek: 	0,9 °
 Houdkoppel: 	4.2 kg-cm 	As lengte: 	22 mm
@@ -81,6 +82,9 @@ Note: The usage of a second SSR allows more lighting to be added without worries
 ##### Filament sensor
 1x [Duet 3d - laser sensor](https://www.123-3d.nl/Duet3D-Laser-Filament-Monitor-LaserFilamentMonitor-i3121-t14808.html)
 
+##### Power automation
+1x SONOFF 10A [BASICR2](https://sonoff.tech/product/diy-smart-switch/basicr2/)
+ 
 ### Software
 #### Base intall
 [Duet light](https://pkg.duet3d.com/DuetPi-lite.zip) - Config [link](https://duet3d.dozuki.com/Wiki/SBC_Setup_for_Duet_3)
@@ -100,6 +104,9 @@ ls -s /opt/duet_vcore3 /root/ # yes I use root on the rasp.
 
 ### Duet 3 6HC - Pins
 
+#### Accelerometer 
+* Temp daughterboard - [LIS3HD](https://www.digikey.nl/en/products/detail/adafruit-industries-llc/3886/10709725) 
+
 #### IO
 Used IO pin headers
 * io_0 - display
@@ -139,6 +146,7 @@ Thermal probes in use:
 
 ## TODO
 - Add printing tracking camera 
+- Add accelerometer config
 
 - All macros are untested until stated otherwise (some are cloned from duet repos, others are mine), list of tested macros: 
 - - Lighting (all)
@@ -150,7 +158,7 @@ Thermal probes in use:
 - - Diagnostics/E steps calibration
 
 ## Electronics backplate
-I've also set a exectronics backplate (to be a cut of alluminium or polycarbonate up to 4mm), you may find it in [thingiverse.com](https://www.thingiverse.com/thing:4792093).
+I've also add a electronics backplate (to be a cut of alluminium or polycarbonate up to 4mm), you may find it in [thingiverse.com](https://www.thingiverse.com/thing:4792093).
 
 ## Links and external sources
 * [GCode library](https://duet3d.dozuki.com/Wiki/Gcode)