Tune stepper parameters, noise reduction 1st try

This commit is contained in:
pedro 2021-06-06 12:57:26 +01:00
parent 703d1d8328
commit 879e7a590a
2 changed files with 9 additions and 8 deletions

1
.gitignore vendored
View File

@ -3,3 +3,4 @@
*.uf2 *.uf2
dwc-settings.json dwc-settings.json
heightmap.csv heightmap.csv
config-override.g

View File

@ -9,14 +9,14 @@ M550 P"vcore3" ; set printer name fqdn: vcor
M669 K1 ; select CoreXY mode M669 K1 ; select CoreXY mode
; Drives ; Drives
M569 P0.0 S0 D3 ; physical drive 0.0 goes backwards M569 P0.0 S0 D3 H50 V50 ; physical drive 0.0 goes backwards
M569 P0.1 S0 D3 ; physical drive 0.1 goes backwards M569 P0.1 S0 D3 H50 V50 ; physical drive 0.1 goes backwards
M569 P0.2 S0 D3 ; physical drive 0.2 goes backwards M569 P0.2 S0 D3 H50 V50 ; physical drive 0.2 goes backwards
M569 P0.3 S1 D3 ; physical drive 0.3 goes forwards M569 P0.3 S1 D3 H50 V50 ; physical drive 0.3 goes forwards
M569 P0.4 S1 D3 ; physical drive 0.4 goes forwards M569 P0.4 S1 D3 H50 V50 ; physical drive 0.4 goes forwards
M569 P0.5 S0 D3 ; physical drive 0.5 goes backwards M569 P0.5 S0 D3 H50 V50 ; physical drive 0.5 goes backwards
M584 X0.4 Y0.3 Z0.0:0.1:0.2 E0.5 ; set drive mapping M584 X0.4 Y0.3 Z0.0:0.1:0.2 E0.5 ; set drive mapping
M350 X16 Y16 Z16 E16 I1 ; configure microstepping with interpolation M350 X16 Y16 Z16 E16 I1 ; configure microstepping with interpolation
M92 X160.00 Y160.00 Z1600.00 E873.08 ; set steps per mm M92 X160.00 Y160.00 Z1600.00 E873.08 ; set steps per mm
M566 X400.00 Y400.00 Z6.00 E120.00 ; set maximum instantaneous speed changes (mm/min) M566 X400.00 Y400.00 Z6.00 E120.00 ; set maximum instantaneous speed changes (mm/min)