From a17a6bf707a883ca7ab16b81bd9545d19ad63328 Mon Sep 17 00:00:00 2001 From: pedro Date: Mon, 24 May 2021 17:41:44 +0200 Subject: [PATCH] Back to defaults with small changes --- bed.g | 8 +-- config.g | 130 +++++++++++++++++++++++++++--------------------- config.json | 1 - connections.txt | 20 ++++++++ deployprobe.g | 6 +-- homeall.g | 48 +++++------------- homex.g | 13 ----- homey.g | 13 ----- homez.g | 24 ++------- pause.g | 11 ---- resume.g | 9 ---- retractprobe.g | 6 +-- sleep.g | 5 -- stop.g | 5 -- tfree0.g | 5 -- tpost0.g | 7 --- tpre0.g | 5 -- 17 files changed, 115 insertions(+), 201 deletions(-) delete mode 100644 config.json create mode 100644 connections.txt delete mode 100644 pause.g delete mode 100644 resume.g delete mode 100644 sleep.g delete mode 100644 stop.g delete mode 100644 tfree0.g delete mode 100644 tpost0.g delete mode 100644 tpre0.g diff --git a/bed.g b/bed.g index ee9ba44..411ac2e 100644 --- a/bed.g +++ b/bed.g @@ -1,7 +1,3 @@ -; bed.g -; called to perform automatic bed compensation via G32 - - ; this script compensates for what the Z offset is ; so if G31 P500 X-30 Y-15 Z1.7 then first probe will be at ; X30 Y20 (when G30 P0 X0 Y5) @@ -9,7 +5,7 @@ M561 ; clear any bed transform G30 P0 X5 Y5 Z-99999 ; probe near a leadscrew -G30 P1 X150 Y485 Z-99999 ; probe near a leadscrew -G30 P2 X470 Y5 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors +G30 P1 X150 Y285 Z-99999 ; probe near a leadscrew +G30 P2 X270 Y5 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors G29 ; probe the bed and enable compensation diff --git a/config.g b/config.g index e3edd30..be2ac5a 100644 --- a/config.g +++ b/config.g @@ -1,77 +1,91 @@ -; Configuration file for Duet 3 (firmware version 3) -; executed by the firmware on start-up -; -; generated by RepRapFirmware Configuration Tool v3.2.3 on Mon May 24 2021 13:04:21 GMT+0200 (Central European Summer Time) - ; General preferences -G90 ; send absolute coordinates... -M83 ; ...but relative extruder moves -M550 P"duet3" ; set printer name -M669 K1 ; select CoreXY mode -G29 S1 ; Set Units to Millimeters +G90 ; send absolute coordinates... +M83 ; ...but relative extruder moves +M550 P"duet3" ; set printer name +M669 K1 ; CoreXY +G29 S1 ; Set Units to Millimeters + +; Network +;;M552 P0.0.0.0 S1 ; enable network and acquire dynamic address via DHCP +;;M586 P0 S1 ; enable HTTP +;;M586 P1 S0 ; disable FTP +;;M586 P2 S0 ; disable Telnet ; Drives -M569 P0.0 S1 ; physical drive 0.0 goes forwards -M569 P0.1 S1 ; physical drive 0.0 goes forwards -M569 P0.2 S1 ; physical drive 0.0 goes forwards -M569 P0.3 S1 ; physical drive 0.3 goes forwards -M569 P0.4 S1 ; physical drive 0.4 goes forwards -M569 P0.5 S1 ; physical drive 0.5 goes forwards -M584 X0.3 Y0.4 Z0.0 Z0.1 Z0.2 E0.5 ; set drive mapping -M350 X16 Y16 Z16 E16 I1 ; configure microstepping with interpolation -M92 X160.00 Y160.00 Z1600.00 E420.00 ; set steps per mm -M566 X400.00 Y400.00 Z6.00 E120.00 ; set maximum instantaneous speed changes (mm/min) -M203 X10800.00 Y10800.00 Z1000.00 E3600.00 ; set maximum speeds (mm/min) -M201 X3000.00 Y3000.00 Z100.00 E3600.00 ; set accelerations (mm/s^2) -M906 X1000 Y1000 Z1000 E800 I30 ; set motor currents (mA) and motor idle factor in per cent -M84 S30 ; Set idle timeout +M569 P0.0 S1 D3 ; physical drive 0.0 goes forwards +M569 P0.1 S1 D3 ; physical drive 0.1 goes forwards +M569 P0.2 S1 D3 ; physical drive 0.2 goes forwards +M569 P0.3 S1 D3 ; physical drive 0.3 goes forwards +M569 P0.4 S1 D3 ; physical drive 0.4 goes forwards +M569 P0.5 S1 D3 ; physical drive 0.5 goes forwards +M584 X0.4 Y0.3 Z0.0:0.1:0.2 E0.5 ; set drive mapping +M350 X16 Y16 Z16 E16 I1 ; configure microstepping with interpolation + +M92 X160.00 Y160.00 Z1600.00 ; set steps per mm +M906 X1000 Y1000 Z800 I30 ; set motor currents (mA) and motor idle factor in per cent +M84 S30 ; Set idle timeout + +M566 X400.00 Y400.00 Z6.00 E120.00 P1 ; set maximum instantaneous speed changes (mm/min) +M203 X10800.00 Y10800.00 Z1000.00 E3600.00 ; set maximum speeds (mm/min) +M201 X3000.00 Y3000.00 Z100.00 E3600.00 ; set accelerations (mm/s^2) ; Axis Limits -M208 X0 Y0 Z0 S1 ; set axis minima -M208 X500 Y500 Z500 S0 ; set axis maxima +M208 X0 Y0 Z0 S1 ; set axis minima +M208 X510 Y500 Z500 S0 ; set axis maxima ; Endstops -M574 X2 S1 P"!io1.in" ; configure active-high endstop for high end on X via pin !io1.in -M574 Y2 S1 P"!io2.in" ; configure active-high endstop for high end on Y via pin !io2.in -M574 Z1 S2 ; configure Z-probe endstop for low end on Z +M574 X1 S1 P"io2.in" ; configure active high endstops +M574 Y2 S1 P"io1.in" ; configure active high endstops +M574 Z1 S2 ; configure Z-probe endstop for low end on Z -; Z-Probe -M950 S0 C"io7.out" ; create servo pin 0 for BLTouch -M558 P9 C"io7.in" H5 F400 T5000 ; set Z probe type to bltouch and the dive height + speeds -G31 P25 X-28 Y-13 Z0.9 ; set Z probe trigger value, offset and trigger height - -M671 X-4.5:250:504.5 Y-4.52:505:-4.52 S5 ; define positions of Z leadscrews or bed levelling screws -M557 X15:500 Y15:500 S100 ; define mesh grid +M671 X-4.5:250:504.5 Y-4.52:505:-4.52 S5 ; define positions of Z leadscrews or bed levelling screws +M557 X30:500 Y15:500 P5 ; define 5x5 mesh grid ; Heaters -M308 S0 P"temp0" Y"thermistor" T100000 B4138 ; configure sensor 0 as thermistor on pin temp0 -M950 H0 C"out0" T0 ; create bed heater output on out0 and map it to sensor 0 -M307 H0 B0 S1.00 ; disable bang-bang mode for the bed heater and set PWM limit -M140 H0 ; map heated bed to heater 0 -M143 H0 S95 ; set temperature limit for heater 0 to 95C -M308 S1 P"temp1" Y"thermistor" T100000 B4138 ; configure sensor 1 as thermistor on pin temp1 -M950 H1 C"out1" T1 ; create nozzle heater output on out1 and map it to sensor 1 -M307 H1 B0 S1.00 ; disable bang-bang mode for heater and set PWM limit -M143 H1 S280 ; set temperature limit for heater 1 to 280C +M308 S0 P"temp0" Y"thermistor" T100000 B3950 A"Bed" ; configure sensor 0 as thermistor on pin temp0 +M950 H0 C"out1" T0 ; create bed heater output on out5 and map it to sensor 0 +M307 H0 B0 S1.00 ; disable bang-bang mode for the bed heater and set PWM limit +M140 H0 ; map heated bed to heater 0 +M143 H0 S110 ; set temperature limit for heater 0 to 110C + +;; Run Bed PID Tune!! Bellow is an example for a 300x300 bed +;; M307 H0 A303.1 C356.7 D1.4 S1.00 V24.0 B0 ; Fans -M950 F0 C"out4" Q500 ; create fan 0 on pin out4 and set its frequency -M106 P0 S1 H-1 ; set fan 0 value. Thermostatic control is turned off -M950 F1 C"out5" Q500 ; create fan 1 on pin out5 and set its frequency -M106 P1 S1 H1 T45 ; set fan 1 value. Thermostatic control is turned on +M950 F0 C"out7" Q500 ; create fan 0 on pin out3 and set its frequency +M106 P0 C"Hotend Fan" S0 H1 T45 L255 ; set fan 0 name and value. Thermostatic control turned on for Hotend +M950 F1 C"out4" Q500 ; create fan 1 on pin out4 and set its frequency +M106 P1 C"Layer Fan" S0 H-1 L255 ; set fan 1 name and value. Thermostatic control is turned off ; Tools -M563 P0 S"Extruder0" D0 H1 F0 ; define tool 0 -G10 P0 X0 Y0 Z0 ; set tool 0 axis offsets -G10 P0 R0 S0 ; set initial tool 0 active and standby temperatures to 0C +M563 P0 D0 H1 F1 ; define tool 0 +G10 P0 X0 Y0 Z0 ; set tool 0 axis offsets +G10 P0 R0 S0 ; set initial tool 0 active and standby temperatures to 0C -; Custom settings are not defined +M950 H1 C"out2" T1 ; create nozzle heater output on out2 and map it to sensor 1 +M307 H1 B0 S1.00 ; disable bang-bang mode for heater and set PWM limit +M143 H1 S250 ; set the maximum temperature in C for heater -; Miscellaneous -M575 P1 S1 B57600 ; enable support for PanelDue -M501 ; load saved parameters from non-volatile memory -M911 S10 R11 P"M913 X0 Y0 G91 M83 G1 Z3 E-5 F1000" ; set voltage thresholds and actions to run on power loss +; EVA 2 / BMG / E3D V6 -M404 N1.75 D0.4 ; Filament width and nozzle diameter +M92 E830 ; set extruder steps per mm, 0.9 angle/step (LDO Pancake) +M906 E800 ; set extruder motor current (mA) and idle factor in per cent + +M308 S1 P"temp1" Y"thermistor" T100000 B4725 C7.060000e-8 A"Hotend" +;; Run Heater PID Tune!! +;; M307 H1 A751.5 C196.6 D4.7 S1.00 V23.9 B0 + +; Z-Probe +;; Inductive Probe +; M558 P5 C"!io3.in" H5 F400 T5000 ; set Z probe type to unmodulated and the dive height + speeds +; G31 P500 X-30 Y-15 Z0.20 ; set Z probe trigger value, offset and trigger height, more Z means closer to the bed +;; BLTouch +M950 S0 C"io7.out" ; Create a servo pin on io2 +M558 P9 C"io7.in" H5 F500 T10800 A5 ; set Z probe type to unmodulated and the dive height + speeds +G31 P25 X-28.00 Y-13.00 Z0.90 ; set Z probe trigger value, offset and trigger height, more Z means closer to the bed + +M404 N1.75 D0.4 ; Filament width and nozzle diameter T0 +; Pressure Advance +; M572 D0 S0.10 diff --git a/config.json b/config.json deleted file mode 100644 index 1d7db03..0000000 --- a/config.json +++ /dev/null @@ -1 +0,0 @@ -{"board":"duet3","expansion_boards":[],"firmware":3,"standalone":false,"nvram":true,"auto_save":{"enabled":true,"save_threshold":10,"resume_threshold":11,"gcodes_to_run":"M913 X0 Y0 G91 M83 G1 Z3 E-5 F1000"},"display":{"type":0,"encoder_steps":4,"spi_frequency":2000000,"menus":[{"name":"main","value":""}],"images":[]},"panelDue":true,"geometry":{"type":"corexy","mins":[0,0,0],"maxes":[500,500,500],"delta_radius":105.6,"homed_height":250,"low_dive_height":false,"max_carriage_travel":260,"print_radius":85,"rod_length":215,"z_min":0},"drives":[{"direction":1,"microstepping":16,"microstepping_interpolation":true,"steps_per_mm":160,"instant_dv":15,"max_speed":100,"acceleration":500,"current":1000,"driver":0,"driver_v3":"0.3","endstop_pin":"!io1.in","endstop_type":1,"endstop_location":2},{"direction":1,"microstepping":16,"microstepping_interpolation":true,"steps_per_mm":160,"instant_dv":15,"max_speed":100,"acceleration":500,"current":1000,"driver":1,"driver_v3":"0.4","endstop_pin":"!io2.in","endstop_type":1,"endstop_location":2},{"direction":1,"microstepping":16,"microstepping_interpolation":true,"steps_per_mm":1600,"instant_dv":1,"max_speed":3,"acceleration":20,"current":1000,"driver":2,"driver_v3":"0.0","endstop_pin":null,"endstop":null,"endstop_type":3,"endstop_location":1},{"direction":1,"microstepping":16,"microstepping_interpolation":true,"steps_per_mm":420,"instant_dv":2,"max_speed":20,"acceleration":250,"current":800,"driver":3,"driver_v3":"0.5"}],"idle":{"used":true,"factor":40,"timeout":30},"homing_speed_fast":30,"homing_speed_slow":6,"travel_speed":100,"z_dive_height":5,"slow_homing":false,"probe":{"type":"bltouch","recovery_time":0.4,"trigger_height":2.5,"trigger_value":500,"x_offset":-28,"y_offset":-13,"speed":0.9,"deploy":true,"points":[],"pwm_channel":3,"pwm_inverted":true,"pwm_pin":"io7.out","input_pin":"io7.in","modulation_pin":null},"bed_is_nozzle":false,"bed":{"present":true,"use_pid":true,"heater":0},"chamber":{"present":false,"use_pid":false,"heater":2},"heaters":[{"temp_limit":95,"scale_factor":100,"series":2200,"thermistor":100000,"beta":4138,"a":0.0005717725,"b":0.0002416626,"c":0,"channel":0,"sensor":0,"output_pin":"out0","sensor_type":"thermistor","sensor_pin":"temp0"},{"temp_limit":280,"scale_factor":100,"series":2200,"thermistor":100000,"beta":4138,"a":0.0005717725,"b":0.0002416626,"c":0,"channel":1,"sensor":1,"output_pin":"out1","sensor_type":"thermistor","sensor_pin":"temp1"}],"num_nozzles":1,"toolchange_wait_for_temperatures":true,"generate_t_code":false,"tools":[{"mix_ratio":[],"number":0,"name":"Extruder0","extruders":[0],"heaters":[1],"fans":[0],"x_offset":0,"y_offset":0,"z_offset":0}],"compensation_x_offset":15,"compensation_y_offset":15,"peripheral_points":3,"halfway_points":3,"calibration_factors":6,"probe_radius":85,"mesh":{"x_min":15,"x_max":500,"y_min":15,"y_max":500,"radius":85,"spacing":100},"home_first":false,"orthogonal":{"compensation":false,"height":50,"deviations":[0,0,0]},"network":{"enabled":true,"mac_address":"","name":"My Printer","password":"","ssid":"","ssid_password":"","dhcp":true,"ip":"192.168.1.20","netmask":"255.255.255.0","gateway":"192.168.1.254","protocols":{"http":true,"ftp":false,"telnet":false}},"fans":[{"name":"","value":100,"inverted":false,"frequency":500,"thermostatic":false,"heaters":[],"trigger_temperature":45,"output_pin":"out4"},{"name":"","value":100,"inverted":false,"frequency":500,"thermostatic":true,"heaters":[1],"trigger_temperature":45,"output_pin":"out5"}],"custom_settings":""} \ No newline at end of file diff --git a/connections.txt b/connections.txt new file mode 100644 index 0000000..a0b86de --- /dev/null +++ b/connections.txt @@ -0,0 +1,20 @@ +io_0 - display +io_1 - y endstop +io_2 - x endstop +io_7 - bltouch + +z left - driver0 +z rear - driver1 +z right - driver2 +right motor - driver3 +left motor - driver4 +extruder motor - driver5 + +out1 - SSR +out2 - filament heater + +temp0 - bed +temp1 - filament heater thermistor + +out7 - hotend fan +out4 - layer fan diff --git a/deployprobe.g b/deployprobe.g index 7fba5ac..488ed1d 100644 --- a/deployprobe.g +++ b/deployprobe.g @@ -1,6 +1,4 @@ ; deployprobe.g -; called to deploy a physical Z probe +; Called to deploy a physical Z probe ; -; generated by RepRapFirmware Configuration Tool v3.2.3 on Mon May 24 2021 13:04:21 GMT+0200 (Central European Summer Time) -M280 P0 S10 ; deploy BLTouch - +M280 P0 S10 ; Deploy the BLTouch pin diff --git a/homeall.g b/homeall.g index ea63b06..2202a23 100644 --- a/homeall.g +++ b/homeall.g @@ -1,45 +1,23 @@ -; homeall.g -; called to home all axes -; -; generated by RepRapFirmware Configuration Tool v3.2.3 on Mon May 24 2021 13:04:21 GMT+0200 (Central European Summer Time) -;G91 ; relative positioning -;G1 H2 Z5 F6000 ; lift Z relative to current position -;G1 H1 X505 Y505 F1800 ; move quickly to X or Y endstop and stop there (first pass) -;G1 H1 X505 ; home X axis -;G1 H1 Y505 ; home Y axis -;G1 X-5 Y-5 F6000 ; go back a few mm -;G1 H1 X505 F360 ; move slowly to X axis endstop once more (second pass) -;G1 H1 Y505 ; then move slowly to Y axis endstop -;G90 ; absolute positioning -;G1 X43 Y28 F6000 ; go to first bed probe point and home Z -;G30 ; home Z by probing the bed -; -;; Uncomment the following lines to lift Z after probing -;;G91 ; relative positioning -;;G1 Z5 F100 ; lift Z relative to current position -;;G90 ; absolute positioning - -;------------------- ; BLTouch -M280 P0 S160 ; Precautionary alarm release -M280 P0 S90 ; Ensure the pin is raised +M280 P0 S160 ; Precautionary alarm release +M280 P0 S90 ; Ensure the pin is raised G91 ; relative positioning G1 H2 Z5 F6000 ; lift Z relative to current position -G1 H1 X-625 Y605 F3600 ; move quickly to X and U axis endstops and stop there (first pass) -G1 H1 X-625 F1800 ; move quickly to X and U axis endstops and stop there (first pass) -G1 H1 Y605 F1800 ; move quickly to X and U axis endstops and stop there (first pass) -G1 H2 X5 Y-5 F6000 ; go back a few mm -G1 H1 X-625 Y605 F360 ; move slowly to X and U axis endstops once more (second pass) -G1 H1 X-625 F360 ; move slowly to X and U axis endstops once more (second pass) -G1 H1 Y605 F360 ; move slowly to X and U axis endstops once more (second pass) +G1 H1 X-625 Y605 F3600 ; move quickly to X and U axis endstops and stop there (first pass) +G1 H1 X-625 F1800 ; move quickly to X and U axis endstops and stop there (first pass) +G1 H1 Y605 F1800 ; move quickly to X and U axis endstops and stop there (first pass) +G1 H2 X5 Y-5 F6000 ; go back a few mm +G1 H1 X-625 Y605 F360 ; move slowly to X and U axis endstops once more (second pass) +G1 H1 X-625 F360 ; move slowly to X and U axis endstops once more (second pass) +G1 H1 Y605 F360 ; move slowly to X and U axis endstops once more (second pass) G90 ; absolute positioning -G1 X150 Y150 F10000 ; go to first probe point +G1 X150 Y150 F10000 ; go to first probe point G30 ; home Z by probing the bed -G91 ; relative positioning -G1 Z5 F100 ; lift Z relative to current position -G90 ; absolute positioning +G91 ; relative positioning +G1 Z5 F100 ; lift Z relative to current position +G90 ; absolute positioning G1 X0 Y0 F10000 diff --git a/homex.g b/homex.g index a5bcc57..b4eae2c 100644 --- a/homex.g +++ b/homex.g @@ -1,16 +1,3 @@ -; homex.g -; called to home the X axis -; -; generated by RepRapFirmware Configuration Tool v3.2.3 on Mon May 24 2021 13:04:21 GMT+0200 (Central European Summer Time) -;G91 ; relative positioning -;G1 H2 Z5 F6000 ; lift Z relative to current position -;G1 H1 X505 F1800 ; move quickly to X axis endstop and stop there (first pass) -;G1 X-5 F6000 ; go back a few mm -;G1 H1 X505 F360 ; move slowly to X axis endstop once more (second pass) -;G1 H2 Z-5 F6000 ; lower Z again -;G90 ; absolute positioning - -;--------------- G91 ; relative positioning ;G1 H2 Z5 F6000 ; lift Z relative to current position G1 H1 X-625 F1800 ; move quickly to X axis endstop and stop there (first pass) diff --git a/homey.g b/homey.g index 1f1bf47..b3f8453 100644 --- a/homey.g +++ b/homey.g @@ -1,16 +1,3 @@ -; homey.g -; called to home the Y axis -; -; generated by RepRapFirmware Configuration Tool v3.2.3 on Mon May 24 2021 13:04:21 GMT+0200 (Central European Summer Time) -;;G91 ; relative positioning -;;G1 H2 Z5 F6000 ; lift Z relative to current position -;;G1 H1 Y505 F1800 ; move quickly to Y axis endstop and stop there (first pass) -;;G1 Y-5 F6000 ; go back a few mm -;;G1 H1 Y505 F360 ; move slowly to Y axis endstop once more (second pass) -;;G1 H2 Z-5 F6000 ; lower Z again -;;G90 ; absolute positioning - -;--------------- G91 ; relative positioning ;G1 H2 Z5 F6000 ; lift Z relative to current position G1 H1 Y605 F1800 ; move quickly to Y axis endstop and stop there (first pass) diff --git a/homez.g b/homez.g index 738088a..ac18e59 100644 --- a/homez.g +++ b/homez.g @@ -1,20 +1,3 @@ -; homez.g -; called to home the Z axis -; -; generated by RepRapFirmware Configuration Tool v3.2.3 on Mon May 24 2021 13:04:21 GMT+0200 (Central European Summer Time) -;;G91 ; relative positioning -;;G1 H2 Z5 F6000 ; lift Z relative to current position -;;G90 ; absolute positioning -;;G1 X43 Y28 F6000 ; go to first probe point -;;G30 ; home Z by probing the bed -;; -;;; Uncomment the following lines to lift Z after probing -;;;G91 ; relative positioning -;;;G1 Z5 F100 ; lift Z relative to current position -;;;G90 ; absolute positioning - - -;--------- ; BLTouch M280 P0 S160 ; Precautionary alarm release M280 P0 S90 ; Ensure the pin is raised @@ -26,6 +9,7 @@ G1 X150 Y150 F10000 ; go to first probe point G30 ; home Z by probing the bed ; Uncomment the following lines to lift Z after probing -G91 ; relative positioning -G1 Z5 F100 ; lift Z relative to current position -G90 ; absolute positioning +;G91 ; relative positioning +;G1 Z5 F100 ; lift Z relative to current position +;G90 ; absolute positioning + diff --git a/pause.g b/pause.g deleted file mode 100644 index ce6810c..0000000 --- a/pause.g +++ /dev/null @@ -1,11 +0,0 @@ -; pause.g -; called when a print from SD card is paused -; -; generated by RepRapFirmware Configuration Tool v3.2.3 on Mon May 24 2021 13:04:21 GMT+0200 (Central European Summer Time) -M83 ; relative extruder moves -G1 E-10 F3600 ; retract 10mm of filament -G91 ; relative positioning -G1 Z5 F360 ; lift Z by 5mm -G90 ; absolute positioning -G1 X0 Y0 F6000 ; go to X=0 Y=0 - diff --git a/resume.g b/resume.g deleted file mode 100644 index 128277c..0000000 --- a/resume.g +++ /dev/null @@ -1,9 +0,0 @@ -; resume.g -; called before a print from SD card is resumed -; -; generated by RepRapFirmware Configuration Tool v3.2.3 on Mon May 24 2021 13:04:21 GMT+0200 (Central European Summer Time) -G1 R1 X0 Y0 Z5 F6000 ; go to 5mm above position of the last print move -G1 R1 X0 Y0 ; go back to the last print move -M83 ; relative extruder moves -G1 E10 F3600 ; extrude 10mm of filament - diff --git a/retractprobe.g b/retractprobe.g index dbc3bdf..902f6ee 100644 --- a/retractprobe.g +++ b/retractprobe.g @@ -1,6 +1,4 @@ ; retractprobe.g -; called to retract a physical Z probe +; Called to retract a physical Z probe ; -; generated by RepRapFirmware Configuration Tool v3.2.3 on Mon May 24 2021 13:04:21 GMT+0200 (Central European Summer Time) -M280 P0 S90 ; retract BLTouch - +M280 P0 S90 ; Retract the BLTouch pin diff --git a/sleep.g b/sleep.g deleted file mode 100644 index 8de4591..0000000 --- a/sleep.g +++ /dev/null @@ -1,5 +0,0 @@ -; sleep.g -; called when M1 (Sleep) is being processed -; -; generated by RepRapFirmware Configuration Tool v3.2.3 on Mon May 24 2021 13:04:21 GMT+0200 (Central European Summer Time) - diff --git a/stop.g b/stop.g deleted file mode 100644 index d316f0a..0000000 --- a/stop.g +++ /dev/null @@ -1,5 +0,0 @@ -; stop.g -; called when M0 (Stop) is run (e.g. when a print from SD card is cancelled) -; -; generated by RepRapFirmware Configuration Tool v3.2.3 on Mon May 24 2021 13:04:21 GMT+0200 (Central European Summer Time) - diff --git a/tfree0.g b/tfree0.g deleted file mode 100644 index cea6577..0000000 --- a/tfree0.g +++ /dev/null @@ -1,5 +0,0 @@ -; tfree0.g -; called when tool 0 is freed -; -; generated by RepRapFirmware Configuration Tool v3.2.3 on Mon May 24 2021 13:04:21 GMT+0200 (Central European Summer Time) - diff --git a/tpost0.g b/tpost0.g deleted file mode 100644 index 14bf9e9..0000000 --- a/tpost0.g +++ /dev/null @@ -1,7 +0,0 @@ -; tpost0.g -; called after tool 0 has been selected -; -; generated by RepRapFirmware Configuration Tool v3.2.3 on Mon May 24 2021 13:04:21 GMT+0200 (Central European Summer Time) -; Wait for set temperatures to be reached -M116 P0 - diff --git a/tpre0.g b/tpre0.g deleted file mode 100644 index d160132..0000000 --- a/tpre0.g +++ /dev/null @@ -1,5 +0,0 @@ -; tpre0.g -; called before tool 0 is selected -; -; generated by RepRapFirmware Configuration Tool v3.2.3 on Mon May 24 2021 13:04:21 GMT+0200 (Central European Summer Time) -