Merge branch 'master' of g.lgeex.com:3dprinting/duet_vcore3

This commit is contained in:
pedro 2021-06-11 14:42:39 +01:00
commit af4171b656

View File

@ -18,7 +18,7 @@ M569 P0.5 S0 D3 H50 V50 ; physical drive 0.5 goes backwar
M584 X0.3 Y0.4 Z0.0:0.1:0.2 E0.5 ; set drive mapping
M350 X16 Y16 Z16 E16 I1 ; configure microstepping with interpolation
M92 X160.00 Y160.00 Z1600.00 E794.43 ; set steps per mm
M92 X160.00 Y160.00 Z1600.00 E833.32 ; set steps per mm
M566 X400.00 Y400.00 Z6.00 E120.00 ; set maximum instantaneous speed changes (mm/min)
M203 X10800.00 Y10800.00 Z1000.00 E1600.00 ; set maximum speeds (mm/min)
M201 X3000.00 Y3000.00 Z100.00 E3600.00 ; set accelerations (mm/s^2)
@ -62,7 +62,7 @@ M143 H1 S280 ; set temperature limit for h
; Fans
M950 F0 C"out7" Q500 ; create fan 0 on pin out7 and set its frequency
M106 P0 C"Hotend fan" S1 H1 T45 ; set fan 0 value. Thermostatic control is turned on
M950 F1 C"out4" 20 ; create fan 1 on pin out4
M950 F1 C"out4" Q20 ; create fan 1 on pin out4
M106 P1 C"Layer fan" S0 H-1 -L255 ; set fan 1 value. Thermostatic control is turned off
; Lights