Add LED control and several other macros

2021-06-03 22:09:42 +00:00
parent b86b210c9b
commit b0288dccc5
90 changed files with 19723 additions and 1 deletions
--- a/macros/Calibration/Non-Linear
+++ b/macros/Calibration/Non-Linear
@@ -0,0 +1,70 @@
+;Non-linear extrusion script from Duet forum. Used to adjust A and B parameters in M592.
+;
+
+M291 S3 R"Non-Linear Extrusion Calibration" P"Preheating and homing. Press Ok to begin."
+
+G10 P0 S230			; heat nozzle to 230
+G28 XY				; home all axis
+G28 Z
+M98 P"0:/macros/1_Nozzle Access.g"	; move to nozzle access position
+G1 X0
+M116				; wait for temps
+M83				; relative extrusion
+G1 E5 F300			; prime the nozzle
+M400				; wait for all moves to finish
+
+M291 S3 R"Preparing for Test" P"Mark 60mm on filament for each test, then press OK"
+M291 S3 R"Begin Extrusion Test" P"Nozzle will move back and forth and extrude."
+
+M117 "1mm/sec extrusion"
+G1 X50 E50 F60
+M400
+M291 S3 R"1mm/sec extrusion" P"Measure distance, and mark next 60mm"
+
+M117 "1.5mm/sec extrusion"
+G1 X0 E50 F90
+M400
+M291 S3 R"1.5mm/sec extrusion" P"Measure distance, and mark next 60mm"
+
+M117 "2mm/sec extrusion"
+G1 X50 E50 F120
+M400
+M291 S3 R"2mm/sec extrusion" P"Measure distance, and mark next 60mm"
+
+M117 "2.5mm/sec extrusion"
+G1 X0 E50 F150
+M400
+M291 S3 R"2.5mm/sec extrusion" P"Measure distance, and mark next 60mm"
+
+M117 "3mm/sec extrusion"
+G1 X50 E50 F180
+M400
+M291 S3 R"3mm/sec extrusion" P"Measure distance, and mark next 60mm"
+
+M117 "3.5mm/sec extrusion"
+G1 X0 E50 F210
+M400
+M291 S3 R"3.5mm/sec extrusion" P"Measure distance, and mark next 60mm"
+
+M117 "4mm/sec extrusion"
+G1 X50 E50 F240
+M400
+M291 S3 R"4mm/sec extrusion" P"Measure distance, and mark next 60mm"
+
+M117 "4.5mm/sec extrusion"
+G1 X0 E50 F270
+M400
+M291 S3 R"4.5mm/sec extrusion" P"Measure distance, and mark next 60mm"
+
+M117 "5mm/sec extrusion"
+G1 X50 E50 F300
+M400
+M291 S3 R"5mm/sec extrusion" P"Measure distance, and mark next 60mm"
+
+M117 "5.5mm/sec extrusion"
+G1 X0 E50 F330
+M400
+G10 P0 S0	; turn off heater
+M291 S3 R"5.5mm/sec extrusion" P"Measure final distance."
+
+M291 R"Test Complete" P"Calculate A and B values for M592" S2