diff --git a/config.g b/config.g
index c52350b..e525b88 100644
--- a/config.g
+++ b/config.g
@@ -18,7 +18,7 @@ M569 P0.5 S0 D3 H50 V50                        ; physical drive 0.5 goes backwar
 M584 X0.3 Y0.4 Z0.0:0.1:0.2 E0.5               ; set drive mapping
 M350 X16 Y16 Z16 E16 I1                        ; configure microstepping with interpolation
 
-M92 X160.00 Y160.00 Z1600.00 E794.43               ; set steps per mm
+M92 X160.00 Y160.00 Z1600.00 E833.32               ; set steps per mm
 M566 X400.00 Y400.00 Z6.00 E120.00                 ; set maximum instantaneous speed changes (mm/min)
 M203 X10800.00 Y10800.00 Z1000.00 E1600.00         ; set maximum speeds (mm/min)
 M201 X3000.00 Y3000.00 Z100.00 E3600.00            ; set accelerations (mm/s^2)
@@ -40,10 +40,10 @@ M558 P9 C"^io7.in" H3 F500 T12000                  ; set Z probe type to bltouch
 ;; Pay special attention to the values bellow on G31, the Z value needs to be validated for your printer
 ;; Start with something like 0.5
 ;; Documentation available: https://duet3d.dozuki.com/Wiki/Test_and_calibrate_the_Z_probe
-G31 P500 X-28 Y-13 Z2.235                           ; set Z probe trigger value, offset and trigger height
+G31 P500 X-28 Y-13 Z2.235                          ; set Z probe trigger value, offset and trigger height
 ;;
-M671 X-4.5:250:504.5 Y-4.52:505:-4.52 S5         ; define positions of Z leadscrews or bed levelling screws
-M557 X25:475 Y25:475 P10                          ; define 10x10 mesh grid
+M671 X-4.5:250:504.5 Y-4.52:505:-4.52 S5           ; define positions of Z leadscrews or bed levelling screws
+M557 X25:475 Y25:475 P10                           ; define 10x10 mesh grid
 
 ; Heaters
 ;; BED