duet_vcore3/bed.g

; this script compensates for what the Z offset is
; so if G31 P500 X-30 Y-15 Z1.7 then first probe will be at
; X30 Y20 (when G30 P0 X0 Y5)


M561 ; clear any bed transform
G30 P0 X10 Y10 Z-99999      ; probe near a leadscrew
G30 P1 X60 Y10 Z-99999     ; probe near a leadscrew
G30 P2 X60 Y60 Z-99999     ; probe near a leadscrew
G30 P3 X230 Y470 Z-99999  ; probe near a leadscrew
G30 P4 X250 Y470 Z-99999  ; probe near a leadscrew
G30 P5 X250 Y450 Z-99999  ; probe near a leadscrew
G30 P6 X270 Y470 Z-99999  ; probe near a leadscrew
G30 P7 X470 Y20 Z-99999   ; probe near a leadscrew
G30 P8 X470 Y5 Z-99999    ; probe near a leadscrew
G30 P9 X450 Y5 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors

M280 P0 S160              ; clear and reset BL touch
G1 Z10 F300
G29 S1                    ; probe the bed and enable compensation
Fix bed and homing coordinates, add calibrate thermal probes, etc 2021-05-28 22:35:11 +00:00			`; this script compensates for what the Z offset is`
Initial commit from RatRig 2021-05-23 12:36:07 +00:00			`; so if G31 P500 X-30 Y-15 Z1.7 then first probe will be at`
			`; X30 Y20 (when G30 P0 X0 Y5)`

Fix and improve bed sensing Fixing: * bed screws location * bed screws order * X max 510 -> 500 Improvements: * Probing points * Home all speed * Probing speed (decreased speed for increased accuracy) 2021-06-14 22:20:49 +00:00
Initial commit from RatRig 2021-05-23 12:36:07 +00:00			`M561 ; clear any bed transform`
Tune the printer for new nozzle 2023-04-29 10:22:39 +00:00			`G30 P0 X10 Y10 Z-99999 ; probe near a leadscrew`
			`G30 P1 X60 Y10 Z-99999 ; probe near a leadscrew`
			`G30 P2 X60 Y60 Z-99999 ; probe near a leadscrew`
Tune homing and bed parameters 2022-02-02 23:19:54 +00:00			`G30 P3 X230 Y470 Z-99999 ; probe near a leadscrew`
			`G30 P4 X250 Y470 Z-99999 ; probe near a leadscrew`
			`G30 P5 X250 Y450 Z-99999 ; probe near a leadscrew`
			`G30 P6 X270 Y470 Z-99999 ; probe near a leadscrew`
			`G30 P7 X470 Y20 Z-99999 ; probe near a leadscrew`
			`G30 P8 X470 Y5 Z-99999 ; probe near a leadscrew`
			`G30 P9 X450 Y5 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors`
pmso mix generated + ratrig + pmso 2021-05-26 21:17:05 +00:00
Tune homing and bed parameters 2022-02-02 23:19:54 +00:00			`M280 P0 S160 ; clear and reset BL touch`
Multiple fixe: accell, bed, filament sensor, tune e-steps Add support to accelerometer Tune probe offset on Z Tune extrusor steps Add accel. files to .gitignore 2022-02-21 13:42:29 +00:00			`G1 Z10 F300`
Tune homing and bed parameters 2022-02-02 23:19:54 +00:00			`G29 S1 ; probe the bed and enable compensation`