duet_vcore3/bed.g

; this script compensates for what the Z offset is
; so if G31 P500 X-30 Y-15 Z1.7 then first probe will be at
; X30 Y20 (when G30 P0 X0 Y5)


M561 ; clear any bed transform

G30 P0 X20 Y20 Z-99999 ; probe near a leadscrew
G30 P1 X252.5 Y480 Z-99999 ; probe near a leadscrew
G30 P2 X480 Y20 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors

M280 P0 S160 ; clear and reset BL touch
;G29  ; probe the bed and enable compensation
Fix bed and homing coordinates, add calibrate thermal probes, etc 2021-05-28 22:35:11 +00:00			`; this script compensates for what the Z offset is`
Initial commit from RatRig 2021-05-23 12:36:07 +00:00			`; so if G31 P500 X-30 Y-15 Z1.7 then first probe will be at`
			`; X30 Y20 (when G30 P0 X0 Y5)`

Fix and improve bed sensing Fixing: * bed screws location * bed screws order * X max 510 -> 500 Improvements: * Probing points * Home all speed * Probing speed (decreased speed for increased accuracy) 2021-06-14 22:20:49 +00:00
Initial commit from RatRig 2021-05-23 12:36:07 +00:00			`M561 ; clear any bed transform`

Fix and improve bed sensing Fixing: * bed screws location * bed screws order * X max 510 -> 500 Improvements: * Probing points * Home all speed * Probing speed (decreased speed for increased accuracy) 2021-06-14 22:20:49 +00:00			`G30 P0 X20 Y20 Z-99999 ; probe near a leadscrew`
Tune bed probing after nozzle change 2021-06-27 17:22:12 +00:00			`G30 P1 X252.5 Y480 Z-99999 ; probe near a leadscrew`
Fix and improve bed sensing Fixing: * bed screws location * bed screws order * X max 510 -> 500 Improvements: * Probing points * Home all speed * Probing speed (decreased speed for increased accuracy) 2021-06-14 22:20:49 +00:00			`G30 P2 X480 Y20 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors`
Initial commit from RatRig 2021-05-23 12:36:07 +00:00
Fix and improve bed sensing Fixing: * bed screws location * bed screws order * X max 510 -> 500 Improvements: * Probing points * Home all speed * Probing speed (decreased speed for increased accuracy) 2021-06-14 22:20:49 +00:00			`M280 P0 S160 ; clear and reset BL touch`
			`;G29 ; probe the bed and enable compensation`
pmso mix generated + ratrig + pmso 2021-05-26 21:17:05 +00:00