3dprinting/duet_vcore3
3dprinting/duet_vcore3
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Update E steps config after calibration, update readme

Browse Source
This commit is contained in:
pedro 2021-06-08 17:59:23 +01:00
parent 1c82956e54
commit 0e84036b5a
2 changed files with 3 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
README.md
View File

@ -110,13 +110,14 @@ Thermal probes in use:
- Setup filament sensor
- Add printing tracking camera
- All macros are untested until stated otherwise, list of tested macros:
- All macros are untested until stated otherwise (cloned from duet repos), list of tested macros:
- - Lighting (all)
- - Preheat (all)
- - PID tuning Bed && HotEnd
- - Preheat PLA / ASA / PETG
- - Musical Tunes
- - Diagnostics/Disallow unhomed moves
- - Diagnostics/E steps calibration
## Electronics backplate
I've also set a exectronics backplate (to be a cut of alluminium or polycarbonate up to 4mm), you may find it in [thingiverse.com](https://www.thingiverse.com/thing:4792093).

2
config.g
View File

@ -18,7 +18,7 @@ M569 P0.5 S0 D3 H50 V50 ; physical drive 0.5 goes backwar
M584 X0.3 Y0.4 Z0.0:0.1:0.2 E0.5 ; set drive mapping
M350 X16 Y16 Z16 E16 I1 ; configure microstepping with interpolation
M92 X160.00 Y160.00 Z1600.00 E873.08 ; set steps per mm
M92 X160.00 Y160.00 Z1600.00 E794.43 ; set steps per mm
M566 X400.00 Y400.00 Z6.00 E120.00 ; set maximum instantaneous speed changes (mm/min)
M203 X10800.00 Y10800.00 Z1000.00 E1600.00 ; set maximum speeds (mm/min)
M201 X3000.00 Y3000.00 Z100.00 E3600.00 ; set accelerations (mm/s^2)