Define calibration mesh within bed boundaries

This commit is contained in:
root 2021-05-30 11:42:56 +00:00
parent 94d6a867bd
commit 2cb30bbf32

View File

@ -37,10 +37,10 @@ M574 Y1 S1 P"io1.in" ; configure active-high endst
; Z-Probe ; Z-Probe
M950 S0 C"io7.out" ; create servo pin 0 for BLTouch M950 S0 C"io7.out" ; create servo pin 0 for BLTouch
M558 P9 C"^io7.in" H3 F500 T12000 ; set Z probe type to bltouch and the dive height + speeds M558 P9 C"^io7.in" H3 F500 T12000 ; set Z probe type to bltouch and the dive height + speeds
G31 P500 X-28 Y13 Z0.9 ; set Z probe trigger value, offset and trigger height G31 P500 X-28 Y13 Z0.9 ; set Z probe trigger value, offset and trigger height
M671 X-4.5:250:504.5 Y504.52:-5:504.52 S5 ; define positions of Z leadscrews or bed levelling screws M671 X-4.5:250:504.5 Y504.52:-5:504.52 S5 ; define positions of Z leadscrews or bed levelling screws
M557 X0:500 Y0:500 P5 ; define 5x5 mesh grid M557 X25:475 Y25:475 P5 ; define 5x5 mesh grid
; Heaters ; Heaters
;; BED ;; BED