3dprinting/duet_vcore3
3dprinting/duet_vcore3
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Duet3 6HC RatRig vcore3 config
18 Commits 2 Branches 5 Tags 3.8 MiB
G-code 96.5%
GAP 3.5%
2cb30bbf32
Go to file
root 2cb30bbf32 Define calibration mesh within bed boundaries
2021-05-30 11:42:56 +00:00
.gitignore Bed calibration possible, X,Y,Z movement possible 2021-05-28 16:23:59 +00:00
bed.g Fix bed and homing coordinates, add calibrate thermal probes, etc 2021-05-28 22:35:11 +00:00
config.g Define calibration mesh within bed boundaries 2021-05-30 11:42:56 +00:00
deployprobe.g Fix bed and homing coordinates, add calibrate thermal probes, etc 2021-05-28 22:35:11 +00:00
homeall.g Change probe offset; trigreer bloutch reset before homing 2021-05-30 11:24:13 +00:00
homex.g Fix bed and homing coordinates, add calibrate thermal probes, etc 2021-05-28 22:35:11 +00:00
homey.g Fix bed and homing coordinates, add calibrate thermal probes, etc 2021-05-28 22:35:11 +00:00
homez.g Change probe offset; trigreer bloutch reset before homing 2021-05-30 11:24:13 +00:00
pause.g pmso mix generated + ratrig + pmso 2021-05-26 21:17:05 +00:00
README.md Add README.md 2021-05-28 23:24:18 +00:00
resume.g pmso mix generated + ratrig + pmso 2021-05-26 21:17:05 +00:00
retractprobe.g Fix bed and homing coordinates, add calibrate thermal probes, etc 2021-05-28 22:35:11 +00:00
sleep.g pmso mix generated + ratrig + pmso 2021-05-26 21:17:05 +00:00
stop.g pmso mix generated + ratrig + pmso 2021-05-26 21:17:05 +00:00
tfree0.g pmso mix generated + ratrig + pmso 2021-05-26 21:17:05 +00:00
tpost0.g pmso mix generated + ratrig + pmso 2021-05-26 21:17:05 +00:00
tpre0.g pmso mix generated + ratrig + pmso 2021-05-26 21:17:05 +00:00

README.md

Duet 3 6HC

HW Config

Pins

IO

Used IO pin headers

  • io_0 - display
  • io_1 - y endstop
  • io_2 - x endstop
  • io_7 - bltouch

Stepper motors

All steppers are 0.9º

  • z left - driver0 - motion backwards (looking from the back of the printer)
  • z rear - driver1 - motion backwards
  • z right - driver2 - motion backwards
  • top right motor - driver3 - Y - motion forwards (looking from the back of the printer)
  • top left motor - driver4 - X - motion forwards
  • extruder motor - driver5 - motion forwards

Outputs

Heating elements (24v)

Heating elements in use:

  • out1 - SSR Bed
  • out2 - Hotend
Fans (24v)

Fans in use:

  • out7 - hotend fan
  • out4 - layer fan

Temperature probes

Thermal probes in use:

  • temp0 - Bed thermistor
  • temp1 - Hotend thermistor

Useful links