3dprinting/duet_vcore3
3dprinting/duet_vcore3
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Tunes

Browse Source 
* Tune ressonance frequency
* Tune stepper currents
* Tune nozzle offset (new nozzle)
This commit is contained in:
pedro 2022-03-14 20:20:26 +00:00
parent 25b0f025ab
commit ab66b295dd
1 changed files with 5 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
config.g
View File

@ -18,10 +18,10 @@ M569 P0.5 S0 D2 H500 V500 ; physical drive 0.5 goes bac
M584 X0.3 Y0.4 Z0.2:0.1:0.0 E0.5 ; set drive mapping
M350 X16 Y16 Z16 E16 I1 ; configure microstepping with interpolation
M92 X80.00 Y80.00 Z1600.00 E794 ; set steps per mm
M566 X500.00 Y500.00 Z4.00 E120.00 P1 ; set maximum instantaneous speed changes (mm/min)
M566 X400.00 Y400.00 Z6.00 E120.00 P1 ; set maximum instantaneous speed changes (mm/min)
M203 X10800.00 Y10800.00 Z1000.00 E3600.00 ; set maximum speeds (mm/min)
M201 X10800.00 Y10800.00 Z400.00 E3600.00 ; set accelerations (mm/s^2)
M906 X1500 Y1500 Z1500 E800 I20 ; set motor currents (mA) and motor idle factor in per cent
M201 X3000 Y3000 Z100.00 E3600.00 ; set accelerations (mm/s^2)
M906 X1300 Y1300 Z800 E800 I20 ; set motor currents (mA) and motor idle factor in per cent
M84 S30 ; Set idle timeout
; Axis Limits
@ -39,7 +39,7 @@ M558 P9 C"^io7.in" H5 F300 T10000 A5 S0.05 R0.2 ; set Z probe type to bltouch
;; Pay special attention to the values bellow on G31, the Z value needs to be validated for your printer
;; Start with something like 0.5
;; Documentation available: https://duet3d.dozuki.com/Wiki/Test_and_calibrate_the_Z_probe
G31 P500 X-35 Y-0.5 Z2.75 ; set Z probe trigger value, offset and trigger height (90 ºc, 15m after reaching temp)
G31 P500 X-35 Y-0.5 Z3.075 ; set Z probe trigger value, offset and trigger height (90 ºc, 15m after reaching temp)
M671 X-6:250:503 Y0:511:0 S100 ; define positions of Z leadscrews or bed levelling screws
M557 X5:465 Y5:465 P20 ; define 20x20 mesh grid
@ -80,7 +80,7 @@ M591 D0 P5 C"io3.in" R30:125 E5.0 S1 ; Duet3D laser sensor for ext
;; More info: regarding sensor orientation: https://www.dropbox.com/s/hu2w5mk57l4zqpg/Accelerometer%20Orientation.pdf
;; Possible orientations 01,02,05,06
M955 P0 C"spi.cs3+spi.cs2" I01 S1344 R10; all wires connected to temperature daughter board connector, Orientation 01, Sampling rate 1344, 10b resolution
M593 P"zvd" F214.3 ; use ZVD input shaping to cancel ringing at 214Hz
M593 P"zvd" F33 ; use ZVD input shaping to cancel ringing at 214Hz
;M593 P"none" ; disable input shaping
;M593 P"custom" H0.4:0.7 T0.0135:0.0135 ; use custom input shaping