3dprinting/duet_vcore3
3dprinting/duet_vcore3
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Tune the printer for new nozzle

Browse Source
This commit is contained in:
pedro 2023-04-29 11:22:39 +01:00
parent 7f3e535160
commit b6b73ae559
3 changed files with 8 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
bed.g
View File

@ -4,9 +4,9 @@
M561 ; clear any bed transform
G30 P0 X50 Y50 Z-99999 ; probe near a leadscrew
G30 P1 X70 Y50 Z-99999 ; probe near a leadscrew
G30 P2 X50 Y70 Z-99999 ; probe near a leadscrew
G30 P0 X10 Y10 Z-99999 ; probe near a leadscrew
G30 P1 X60 Y10 Z-99999 ; probe near a leadscrew
G30 P2 X60 Y60 Z-99999 ; probe near a leadscrew
G30 P3 X230 Y470 Z-99999 ; probe near a leadscrew
G30 P4 X250 Y470 Z-99999 ; probe near a leadscrew
G30 P5 X250 Y450 Z-99999 ; probe near a leadscrew

10
config.g
View File

@ -21,7 +21,7 @@ M92 X80.00 Y80.00 Z1600.00 E794 ; set steps per mm
M566 X400.00 Y400.00 Z6.00 E120.00 P1 ; set maximum instantaneous speed changes (mm/min)
M203 X10800.00 Y10800.00 Z1000.00 E3600.00 ; set maximum speeds (mm/min)
M201 X3000 Y3000 Z100.00 E3600.00 ; set accelerations (mm/s^2)
M906 X1500 Y1500 Z800 E800 I20 ; set motor currents (mA) and motor idle factor in per cent
M906 X1700 Y1700 Z800 E800 I20 ; set motor currents (mA) and motor idle factor in per cent
M84 S30 ; Set idle timeout
; Axis Limits
@ -39,9 +39,9 @@ M558 P9 C"^io7.in" H5 F300 T10000 A5 S0.05 R0.2 ; set Z probe type to bltouch
;; Pay special attention to the values bellow on G31, the Z value needs to be validated for your printer
;; Start with something like 0.5
;; Documentation available: https://duet3d.dozuki.com/Wiki/Test_and_calibrate_the_Z_probe
G31 P500 X-35 Y-0.5 Z2.900 ; set Z probe trigger value, offset and trigger height (90 ºc, 15m after reaching temp)
M671 X-6:250:503 Y0:511:0 S100 ; define positions of Z leadscrews or bed levelling screws
M557 X5:465 Y5:465 P20 ; define 20x20 mesh grid
G31 P500 X-35 Y-0.5 Z2.84 ; set Z probe trigger value, offset and trigger height (90 ºc, 15m after reaching temp)
M671 X-4.5:250:503 Y4.52:505:-4.5 S100 ; define positions of Z leadscrews or bed levelling screws
M557 X5:465 Y5:465 P5 ; define mesh grid
; Heaters
;; BED
@ -72,7 +72,7 @@ G10 P0 X0 Y0 Z0 ; set tool 0 axis offsets
G10 P0 R0 S0 ; set initial tool 0 active and standby temperatures to 0C
; Filament sensor - Duet3D laser filament monitor
M591 D0 P5 C"io3.in" R30:125 E5.0 S1 ; Duet3D laser sensor for extruder drive 0, connected to endstop input 4 (E0), tolerance 30 to 125%, 5mm comparison length, enabled filament monitoring
M591 D0 P5 C"io3.in" R20:150 E15.0 S1 ; Duet3D laser sensor for extruder drive 0, connected to endstop input 4 (E0), tolerance 30 to 125%, 5mm comparison length, enabled filament monitoring
; Miscellaneous
M575 P1 S1 B57600 ; enable support for PanelDue

BIN
reprapfirmware_3.4.5-1_all.deb Normal file
View File

Binary file not shown.