3dprinting/duet_vcore3
3dprinting/duet_vcore3
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Set parameters for ratrig 500x500x500

Browse Source
This commit is contained in:
pedro 2021-05-23 18:03:29 +02:00
parent 8868cbddc8
commit d7ad934fd8
1 changed files with 24 additions and 20 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

44
config.g
View File

@ -1,15 +1,18 @@
; Connect to local display
M575 P1 B57600 S1
; General preferences ; General preferences
G90 ; send absolute coordinates... G90 ; send absolute coordinates...
M83 ; ...but relative extruder moves M83 ; ...but relative extruder moves
M550 P"V-Core 3" ; set printer name M550 P"Vcore3.int.lgx.io" ; set printer name
M669 K1 ; CoreXY M669 K1 ; CoreXY
G29 S1 ; Set Units to Millimeters G29 S1 ; Set Units to Millimeters
; Network ; Network
M552 P0.0.0.0 S1 ; enable network and acquire dynamic address via DHCP ;M552 P0.0.0.0 S1 ; enable network and acquire dynamic address via DHCP
M586 P0 S1 ; enable HTTP ;M586 P0 S1 ; enable HTTP
M586 P1 S0 ; disable FTP ;M586 P1 S0 ; disable FTP
M586 P2 S0 ; disable Telnet ;;M586 P2 S0 ; disable Telnet
; Drives ; Drives
M569 P0.0 S1 D3 ; physical drive 0.0 goes forwards M569 P0.0 S1 D3 ; physical drive 0.0 goes forwards
@ -21,7 +24,8 @@ M569 P0.5 S1 D3 ; physical drive 0.5 goes forwards
M584 X0.4 Y0.3 Z0.0:0.1:0.2 E0.5 ; set drive mapping M584 X0.4 Y0.3 Z0.0:0.1:0.2 E0.5 ; set drive mapping
M350 X16 Y16 Z16 E16 I1 ; configure microstepping with interpolation M350 X16 Y16 Z16 E16 I1 ; configure microstepping with interpolation
M92 X80.00 Y80.00 Z800.00 ; set steps per mm ;;M92 X80.00 Y80.00 Z800.00 ; set steps per mm
M92 X160.00 Y160.00 Z1600.00 ; set steps per mm doubled due to 0.9 per step instead of default 1.8
M906 X1000 Y1000 Z800 I30 ; set motor currents (mA) and motor idle factor in per cent M906 X1000 Y1000 Z800 I30 ; set motor currents (mA) and motor idle factor in per cent
M84 S30 ; Set idle timeout M84 S30 ; Set idle timeout
@ -31,11 +35,11 @@ M201 X3000.00 Y3000.00 Z100.00 E3600.00 ; set accelerations (mm/s^2)
; Axis Limits ; Axis Limits
M208 X0 Y0 Z0 S1 ; set axis minima M208 X0 Y0 Z0 S1 ; set axis minima
M208 X310 Y300 Z300 S0 ; set axis maxima M208 X510 Y500 Z500 S0 ; set axis maxima
; Endstops ; Endstops
M574 X1 S1 P"io1.in" ; configure active high endstops M574 X1 S1 P"io1.in" ; configure active high endstops
M574 Y2 S1 P"io0.in" ; configure active high endstops M574 Y2 S1 P"io2.in" ; configure active high endstops
M574 Z1 S2 ; configure Z-probe endstop for low end on Z M574 Z1 S2 ; configure Z-probe endstop for low end on Z
M671 X-4.5:150:304.5 Y-4.52:305:-4.52 S5 ; define positions of Z leadscrews or bed levelling screws M671 X-4.5:150:304.5 Y-4.52:305:-4.52 S5 ; define positions of Z leadscrews or bed levelling screws
@ -43,18 +47,18 @@ M557 X30:300 Y15:300 P5 ; define 5x5 mesh grid
; Heaters ; Heaters
M308 S0 P"temp0" Y"thermistor" T100000 B3950 A"Bed" ; configure sensor 0 as thermistor on pin temp0 M308 S0 P"temp0" Y"thermistor" T100000 B3950 A"Bed" ; configure sensor 0 as thermistor on pin temp0
M950 H0 C"out0" T0 ; create bed heater output on out5 and map it to sensor 0 M950 H0 C"out0" T0 ; create bed heater output on out0 and map it to sensor 0
M307 H0 B0 S1.00 ; disable bang-bang mode for the bed heater and set PWM limit M307 H0 B0 S1.00 ; disable bang-bang mode for the bed heater and set PWM limit
M140 H0 ; map heated bed to heater 0 M140 H0 ; map heated bed to heater 0
M143 H0 S110 ; set temperature limit for heater 0 to 110C M143 H0 S95 ; set temperature limit for heater 0 to 95C
;; Run Bed PID Tune!! Bellow is an example for a 300x300 bed ;; Run Bed PID Tune!! Bellow is an example for a 300x300 bed
;; M307 H0 A303.1 C356.7 D1.4 S1.00 V24.0 B0 ;; M307 H0 A303.1 C356.7 D1.4 S1.00 V24.0 B0 ; TODO - check values for 500x500
; Fans ; Fans
M950 F0 C"out3" Q500 ; create fan 0 on pin out3 and set its frequency M950 F0 C"out7" Q500 ; create fan 0 on pin out7 and set its frequency
M106 P0 C"Hotend Fan" S0 H1 T45 L255 ; set fan 0 name and value. Thermostatic control turned on for Hotend M106 P0 C"Hotend Fan" S0 H1 T45 L255 ; set fan 0 name and value. Thermostatic control turned on for Hotend
M950 F1 C"out4" Q500 ; create fan 1 on pin out4 and set its frequency M950 F1 C"out8" Q500 ; create fan 1 on pin out8 and set its frequency
M106 P1 C"Layer Fan" S0 H-1 L255 ; set fan 1 name and value. Thermostatic control is turned off M106 P1 C"Layer Fan" S0 H-1 L255 ; set fan 1 name and value. Thermostatic control is turned off
; Tools ; Tools
@ -62,27 +66,27 @@ M563 P0 D0 H1 F1 ; define tool 0
G10 P0 X0 Y0 Z0 ; set tool 0 axis offsets G10 P0 X0 Y0 Z0 ; set tool 0 axis offsets
G10 P0 R0 S0 ; set initial tool 0 active and standby temperatures to 0C G10 P0 R0 S0 ; set initial tool 0 active and standby temperatures to 0C
M950 H1 C"out1" T1 ; create nozzle heater output on out2 and map it to sensor 1 M950 H1 C"out1" T1 ; create nozzle heater output on out1 and map it to sensor 1
M307 H1 B0 S1.00 ; disable bang-bang mode for heater and set PWM limit M307 H1 B0 S1.00 ; disable bang-bang mode for heater and set PWM limit
M143 H1 S250 ; set the maximum temperature in C for heater M143 H1 S270 ; set the maximum temperature in C for heater
; EVA 2 / BMG / E3D V6 ; EVA 2 / BMG / E3D V6
M92 E415 ; set extruder steps per mm, 1.8 angle/step M92 E415 ; set extruder steps per mm, 0.9 angle/step
M906 E800 ; set extruder motor current (mA) and idle factor in per cent M906 E800 ; set extruder motor current (mA) and idle factor in per cent
M308 S1 P"temp1" Y"thermistor" T100000 B4725 C7.060000e-8 A"Hotend" M308 S1 P"temp1" Y"thermistor" T100000 B4725 C7.060000e-8 A"Hotend"
;; Run Heater PID Tune!! ;; Run Heater PID Tune!!
;; M307 H1 A751.5 C196.6 D4.7 S1.00 V23.9 B0 ;; M307 H1 A751.5 C196.6 D4.7 S1.00 V23.9 B0 ;; TODO - Check values for 500x500
; Z-Probe ; Z-Probe
;; Inductive Probe ;; Inductive Probe
; M558 P5 C"!io3.in" H5 F400 T5000 ; set Z probe type to unmodulated and the dive height + speeds ; M558 P5 C"!io3.in" H5 F400 T5000 ; set Z probe type to unmodulated and the dive height + speeds
; G31 P500 X-30 Y-15 Z0.20 ; set Z probe trigger value, offset and trigger height, more Z means closer to the bed ; G31 P500 X-30 Y-15 Z0.20 ; set Z probe trigger value, offset and trigger height, more Z means closer to the bed
;; BLTouch ;; BLTouch
; M950 S0 C"io2.out" ; Create a servo pin on io2 M950 S0 C"io8.out" ; Create a servo pin on io2
; M558 P9 C"io2.in" H5 F500 T10800 A5 ; set Z probe type to unmodulated and the dive height + speeds M558 P9 C"io8.in" H5 F500 T10800 A5 ; set Z probe type to unmodulated and the dive height + speeds
; G31 P25 X-28.00 Y-13.00 Z0.90 ; set Z probe trigger value, offset and trigger height, more Z means closer to the bed G31 P25 X-28.00 Y-13.00 Z0.90 ; set Z probe trigger value, offset and trigger height, more Z means closer to the bed
M404 N1.75 D0.4 ; Filament width and nozzle diameter M404 N1.75 D0.4 ; Filament width and nozzle diameter
T0 T0