Tune E-steps, tune bed config

This commit is contained in:
pedro 2021-06-13 23:54:09 +01:00
parent a49c0a7ce9
commit 60629756fe
2 changed files with 5 additions and 4 deletions

7
bed.g
View File

@ -2,11 +2,12 @@
; so if G31 P500 X-30 Y-15 Z1.7 then first probe will be at
; X30 Y20 (when G30 P0 X0 Y5)
M280 P0 S160 ; clear and reset BL touch
M561 ; clear any bed transform
G30 P0 X25 Y20 Z-99999 ; probe near a leadscrew
G30 P1 X250 Y485 Z-99999 ; probe near a leadscrew
G30 P2 X25 Y20 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors
G30 P0 X25 Y25 Z-99999 ; probe near a leadscrew
G30 P1 X250 Y475 Z-99999 ; probe near a leadscrew
G30 P2 X475 Y25 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors
G29 ; probe the bed and enable compensation

View File

@ -18,7 +18,7 @@ M569 P0.5 S0 D3 H50 V50 ; physical drive 0.5 goes backwar
M584 X0.3 Y0.4 Z0.0:0.1:0.2 E0.5 ; set drive mapping
M350 X16 Y16 Z16 E16 I1 ; configure microstepping with interpolation
M92 X160.00 Y160.00 Z1600.00 E830 ; set steps per mm
M92 X160.00 Y160.00 Z1600.00 E842 ; set steps per mm
M566 X300.00 Y300.00 Z6.00 E120.00 ; set maximum instantaneous speed changes (mm/min)
M203 X10800.00 Y10800.00 Z1000.00 E1600.00 ; set maximum speeds (mm/min)
M201 X2000.00 Y2000.00 Z100.00 E3600.00 ; set accelerations (mm/s^2)