Bed calibration possible, X,Y,Z movement possible

This commit is contained in:
pedro 2021-05-28 16:23:59 +00:00
parent 73e2095286
commit 96e4e47894
5 changed files with 14 additions and 9 deletions

3
.gitignore vendored Normal file
View File

@ -0,0 +1,3 @@
*.bak
dwc-settings.json
heightmap.csv

View File

@ -10,9 +10,9 @@ M550 P"Duet3" ; set printer name
M669 K1 ; select CoreXY mode M669 K1 ; select CoreXY mode
; Drives ; Drives
M569 P0.0 S1 D3 ; physical drive 0.0 goes forwards M569 P0.0 S0 D3 ; physical drive 0.0 goes backwards
M569 P0.1 S1 D3 ; physical drive 0.1 goes forwards M569 P0.1 S0 D3 ; physical drive 0.1 goes backwards
M569 P0.2 S1 D3 ; physical drive 0.2 goes forwards M569 P0.2 S0 D3 ; physical drive 0.2 goes backwards
M569 P0.3 S1 D3 ; physical drive 0.3 goes forwards M569 P0.3 S1 D3 ; physical drive 0.3 goes forwards
M569 P0.4 S1 D3 ; physical drive 0.4 goes forwards M569 P0.4 S1 D3 ; physical drive 0.4 goes forwards
M569 P0.5 S1 D3 ; physical drive 0.5 goes forwards M569 P0.5 S1 D3 ; physical drive 0.5 goes forwards
@ -37,7 +37,7 @@ M574 Y1 S1 P"io1.in" ; configure active-high endst
; Z-Probe ; Z-Probe
M950 S0 C"io7.out" ; create servo pin 0 for BLTouch M950 S0 C"io7.out" ; create servo pin 0 for BLTouch
M558 P9 C"^io7.in" H5 F54 T6000 ; set Z probe type to bltouch and the dive height + speeds M558 P9 C"^io7.in" H3 F180 T12000 ; set Z probe type to bltouch and the dive height + speeds
G31 P500 X-28 Y-13 Z0.9 ; set Z probe trigger value, offset and trigger height G31 P500 X-28 Y-13 Z0.9 ; set Z probe trigger value, offset and trigger height
M557 X50:500 Y50:500 S50 ; define mesh grid M557 X50:500 Y50:500 S50 ; define mesh grid

View File

@ -2,5 +2,7 @@
; called to deploy a physical Z probe ; called to deploy a physical Z probe
; ;
M280 P0 S10 ; deploy BLTouch
M280 P0 S160 ; clear and reset BL touch
M280 P0 S10 ;

View File

@ -3,11 +3,11 @@
; ;
G91 ; relative positioning G91 ; relative positioning
G1 H2 Z5 F6000 ; lift Z relative to current position ;G1 H2 Z5 F6000 ; lift Z relative to current position
G1 H1 X-625 F1800 ; move quickly to X axis endstop and stop there (first pass) G1 H1 X-625 F1800 ; move quickly to X axis endstop and stop there (first pass)
G1 H2 X5 F6000 ; go back a few mm G1 H2 X5 F6000 ; go back a few mm
G1 H1 X-625 F360 ; move slowly to X axis endstop once more (second pass) G1 H1 X-625 F360 ; move slowly to X axis endstop once more (second pass)
G1 H2 Z-5 F6000 ; lower Z again ;G1 H2 Z-5 F6000 ; lower Z again
G90 ; absolute positioning G90 ; absolute positioning
G1 X0 F6000 G1 X0 F6000

View File

@ -3,11 +3,11 @@
; ;
G91 ; relative positioning G91 ; relative positioning
G1 H2 Z5 F6000 ; lift Z relative to current position ;G1 H2 Z5 F6000 ; lift Z relative to current position
G1 H1 Y-605 F1800 ; move quickly to Y axis endstop and stop there (first pass) G1 H1 Y-605 F1800 ; move quickly to Y axis endstop and stop there (first pass)
G1 Y-5 F6000 ; go back a few mm G1 Y-5 F6000 ; go back a few mm
G1 H1 Y-605 F360 ; move slowly to Y axis endstop once more (second pass) G1 H1 Y-605 F360 ; move slowly to Y axis endstop once more (second pass)
G1 H2 Z-5 F6000 ; lower Z again ;G1 H2 Z-5 F6000 ; lower Z again
G90 ; absolute positioning G90 ; absolute positioning
G1 Y0 F6000 G1 Y0 F6000