Back to defaults with small changes

bed.g

@@ -1,7 +1,3 @@
-; bed.g
-; called to perform automatic bed compensation via G32
-
-
 ; this script compensates for what the Z offset is
 ; so if G31 P500 X-30 Y-15 Z1.7 then first probe will be at
 ; X30 Y20 (when G30 P0 X0 Y5)
@@ -9,7 +5,7 @@
 M561 ; clear any bed transform
 
 G30 P0 X5 Y5 Z-99999 ; probe near a leadscrew
-G30 P1 X150 Y485 Z-99999 ; probe near a leadscrew
+G30 P1 X150 Y285 Z-99999 ; probe near a leadscrew
-G30 P2 X470 Y5 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors
+G30 P2 X270 Y5 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors
 
 G29  ; probe the bed and enable compensation

config.g

@@ -1,77 +1,91 @@
-; Configuration file for Duet 3 (firmware version 3)
-; executed by the firmware on start-up
-;
-; generated by RepRapFirmware Configuration Tool v3.2.3 on Mon May 24 2021 13:04:21 GMT+0200 (Central European Summer Time)
-
 ; General preferences
 G90                                     ; send absolute coordinates...
 M83                                     ; ...but relative extruder moves
 M550 P"duet3"                        ; set printer name
-M669 K1                                            ; select CoreXY mode
+M669 K1                                 ; CoreXY
 G29 S1                                  ; Set Units to Millimeters
 
+; Network
+;;M552 P0.0.0.0 S1                        ; enable network and acquire dynamic address via DHCP
+;;M586 P0 S1                              ; enable HTTP
+;;M586 P1 S0                              ; disable FTP
+;;M586 P2 S0                              ; disable Telnet
+
 ; Drives
-M569 P0.0 S1                                       ; physical drive 0.0 goes forwards
+M569 P0.0 S1 D3                         ; physical drive 0.0 goes forwards
-M569 P0.1 S1                                       ; physical drive 0.0 goes forwards
+M569 P0.1 S1 D3                         ; physical drive 0.1 goes forwards
-M569 P0.2 S1                                       ; physical drive 0.0 goes forwards
+M569 P0.2 S1 D3                         ; physical drive 0.2 goes forwards
-M569 P0.3 S1                                       ; physical drive 0.3 goes forwards
+M569 P0.3 S1 D3                         ; physical drive 0.3 goes forwards
-M569 P0.4 S1                                       ; physical drive 0.4 goes forwards
+M569 P0.4 S1 D3                         ; physical drive 0.4 goes forwards
-M569 P0.5 S1                                       ; physical drive 0.5 goes forwards
+M569 P0.5 S1 D3                         ; physical drive 0.5 goes forwards
-M584 X0.3 Y0.4 Z0.0 Z0.1 Z0.2 E0.5                 ; set drive mapping
+M584 X0.4 Y0.3 Z0.0:0.1:0.2 E0.5        ; set drive mapping
 M350 X16 Y16 Z16 E16 I1                 ; configure microstepping with interpolation
-M92 X160.00 Y160.00 Z1600.00 E420.00               ; set steps per mm
+
-M566 X400.00 Y400.00 Z6.00 E120.00                 ; set maximum instantaneous speed changes (mm/min)
+M92 X160.00 Y160.00 Z1600.00            ; set steps per mm
+M906 X1000 Y1000 Z800 I30               ; set motor currents (mA) and motor idle factor in per cent
+M84 S30                                 ; Set idle timeout
+
+M566 X400.00 Y400.00 Z6.00 E120.00 P1          ; set maximum instantaneous speed changes (mm/min)
 M203 X10800.00 Y10800.00 Z1000.00 E3600.00     ; set maximum speeds (mm/min)
 M201 X3000.00 Y3000.00 Z100.00 E3600.00        ; set accelerations (mm/s^2)
-M906 X1000 Y1000 Z1000 E800 I30                    ; set motor currents (mA) and motor idle factor in per cent
-M84 S30                                            ; Set idle timeout
 
 ; Axis Limits
 M208 X0 Y0 Z0 S1                               ; set axis minima
-M208 X500 Y500 Z500 S0                             ; set axis maxima
+M208 X510 Y500 Z500 S0                         ; set axis maxima
 
 ; Endstops
-M574 X2 S1 P"!io1.in"                              ; configure active-high endstop for high end on X via pin !io1.in
+M574 X1 S1 P"io2.in"                           ; configure active high endstops
-M574 Y2 S1 P"!io2.in"                              ; configure active-high endstop for high end on Y via pin !io2.in
+M574 Y2 S1 P"io1.in"                           ; configure active high endstops
 M574 Z1 S2                                     ; configure Z-probe endstop for low end on Z
 
-; Z-Probe
-M950 S0 C"io7.out"                                 ; create servo pin 0 for BLTouch
-M558 P9 C"io7.in" H5 F400 T5000                    ; set Z probe type to bltouch and the dive height + speeds
-G31 P25 X-28 Y-13 Z0.9                             ; set Z probe trigger value, offset and trigger height
-
 M671 X-4.5:250:504.5 Y-4.52:505:-4.52 S5       ; define positions of Z leadscrews or bed levelling screws
-M557 X15:500 Y15:500 S100                          ; define mesh grid
+M557 X30:500 Y15:500 P5                        ; define 5x5 mesh grid
 
 ; Heaters
-M308 S0 P"temp0" Y"thermistor" T100000 B4138       ; configure sensor 0 as thermistor on pin temp0
+M308 S0 P"temp0" Y"thermistor" T100000 B3950 A"Bed"    ; configure sensor 0 as thermistor on pin temp0
-M950 H0 C"out0" T0                                 ; create bed heater output on out0 and map it to sensor 0
+M950 H0 C"out1" T0                                     ; create bed heater output on out5 and map it to sensor 0
 M307 H0 B0 S1.00                                       ; disable bang-bang mode for the bed heater and set PWM limit
 M140 H0                                                ; map heated bed to heater 0
-M143 H0 S95                                        ; set temperature limit for heater 0 to 95C
+M143 H0 S110                                           ; set temperature limit for heater 0 to 110C
-M308 S1 P"temp1" Y"thermistor" T100000 B4138       ; configure sensor 1 as thermistor on pin temp1
+
-M950 H1 C"out1" T1                                 ; create nozzle heater output on out1 and map it to sensor 1
+;; Run Bed PID Tune!! Bellow is an example for a 300x300 bed
-M307 H1 B0 S1.00                                   ; disable bang-bang mode for heater  and set PWM limit
+;; M307 H0 A303.1 C356.7 D1.4 S1.00 V24.0 B0
-M143 H1 S280                                       ; set temperature limit for heater 1 to 280C
 
 ; Fans
-M950 F0 C"out4" Q500                               ; create fan 0 on pin out4 and set its frequency
+M950 F0 C"out7" Q500                   ; create fan 0 on pin out3 and set its frequency
-M106 P0 S1 H-1                                     ; set fan 0 value. Thermostatic control is turned off
+M106 P0 C"Hotend Fan" S0 H1 T45 L255   ; set fan 0 name and value. Thermostatic control turned on for Hotend
-M950 F1 C"out5" Q500                               ; create fan 1 on pin out5 and set its frequency
+M950 F1 C"out4" Q500                   ; create fan 1 on pin out4 and set its frequency
-M106 P1 S1 H1 T45                                  ; set fan 1 value. Thermostatic control is turned on
+M106 P1 C"Layer Fan" S0 H-1 L255       ; set fan 1 name and value. Thermostatic control is turned off
 
 ; Tools
-M563 P0 S"Extruder0" D0 H1 F0                      ; define tool 0
+M563 P0 D0 H1 F1           ; define tool 0
 G10 P0 X0 Y0 Z0            ; set tool 0 axis offsets
 G10 P0 R0 S0               ; set initial tool 0 active and standby temperatures to 0C
 
-; Custom settings are not defined
+M950 H1 C"out2" T1         ; create nozzle heater output on out2 and map it to sensor 1
+M307 H1 B0 S1.00           ; disable bang-bang mode for heater and set PWM limit
+M143 H1 S250               ; set the maximum temperature in C for heater
 
-; Miscellaneous
+; EVA 2 / BMG / E3D V6
-M575 P1 S1 B57600                                  ; enable support for PanelDue
+
-M501                                               ; load saved parameters from non-volatile memory
+M92 E830          ; set extruder steps per mm, 0.9 angle/step (LDO Pancake)
-M911 S10 R11 P"M913 X0 Y0 G91 M83 G1 Z3 E-5 F1000" ; set voltage thresholds and actions to run on power loss
+M906 E800         ; set extruder motor current (mA) and idle factor in per cent
+
+M308 S1 P"temp1" Y"thermistor" T100000 B4725 C7.060000e-8 A"Hotend"  
+;; Run Heater PID Tune!! 
+;; M307 H1 A751.5 C196.6 D4.7 S1.00 V23.9 B0
+
+; Z-Probe
+;; Inductive Probe
+; M558 P5 C"!io3.in" H5 F400 T5000       ; set Z probe type to unmodulated and the dive height + speeds
+; G31 P500 X-30 Y-15 Z0.20               ; set Z probe trigger value, offset and trigger height, more Z means closer to the bed
+;; BLTouch
+M950 S0 C"io7.out"                       ; Create a servo pin on io2
+M558 P9 C"io7.in" H5 F500 T10800 A5      ; set Z probe type to unmodulated and the dive height + speeds
+G31 P25 X-28.00 Y-13.00 Z0.90            ; set Z probe trigger value, offset and trigger height, more Z means closer to the bed
 
 M404 N1.75 D0.4                          ; Filament width and nozzle diameter
 T0
 
+; Pressure Advance
+; M572 D0 S0.10

config.json

@@ -1 +0,0 @@
-{"board":"duet3","expansion_boards":[],"firmware":3,"standalone":false,"nvram":true,"auto_save":{"enabled":true,"save_threshold":10,"resume_threshold":11,"gcodes_to_run":"M913 X0 Y0 G91 M83 G1 Z3 E-5 F1000"},"display":{"type":0,"encoder_steps":4,"spi_frequency":2000000,"menus":[{"name":"main","value":""}],"images":[]},"panelDue":true,"geometry":{"type":"corexy","mins":[0,0,0],"maxes":[500,500,500],"delta_radius":105.6,"homed_height":250,"low_dive_height":false,"max_carriage_travel":260,"print_radius":85,"rod_length":215,"z_min":0},"drives":[{"direction":1,"microstepping":16,"microstepping_interpolation":true,"steps_per_mm":160,"instant_dv":15,"max_speed":100,"acceleration":500,"current":1000,"driver":0,"driver_v3":"0.3","endstop_pin":"!io1.in","endstop_type":1,"endstop_location":2},{"direction":1,"microstepping":16,"microstepping_interpolation":true,"steps_per_mm":160,"instant_dv":15,"max_speed":100,"acceleration":500,"current":1000,"driver":1,"driver_v3":"0.4","endstop_pin":"!io2.in","endstop_type":1,"endstop_location":2},{"direction":1,"microstepping":16,"microstepping_interpolation":true,"steps_per_mm":1600,"instant_dv":1,"max_speed":3,"acceleration":20,"current":1000,"driver":2,"driver_v3":"0.0","endstop_pin":null,"endstop":null,"endstop_type":3,"endstop_location":1},{"direction":1,"microstepping":16,"microstepping_interpolation":true,"steps_per_mm":420,"instant_dv":2,"max_speed":20,"acceleration":250,"current":800,"driver":3,"driver_v3":"0.5"}],"idle":{"used":true,"factor":40,"timeout":30},"homing_speed_fast":30,"homing_speed_slow":6,"travel_speed":100,"z_dive_height":5,"slow_homing":false,"probe":{"type":"bltouch","recovery_time":0.4,"trigger_height":2.5,"trigger_value":500,"x_offset":-28,"y_offset":-13,"speed":0.9,"deploy":true,"points":[],"pwm_channel":3,"pwm_inverted":true,"pwm_pin":"io7.out","input_pin":"io7.in","modulation_pin":null},"bed_is_nozzle":false,"bed":{"present":true,"use_pid":true,"heater":0},"chamber":{"present":false,"use_pid":false,"heater":2},"heaters":[{"temp_limit":95,"scale_factor":100,"series":2200,"thermistor":100000,"beta":4138,"a":0.0005717725,"b":0.0002416626,"c":0,"channel":0,"sensor":0,"output_pin":"out0","sensor_type":"thermistor","sensor_pin":"temp0"},{"temp_limit":280,"scale_factor":100,"series":2200,"thermistor":100000,"beta":4138,"a":0.0005717725,"b":0.0002416626,"c":0,"channel":1,"sensor":1,"output_pin":"out1","sensor_type":"thermistor","sensor_pin":"temp1"}],"num_nozzles":1,"toolchange_wait_for_temperatures":true,"generate_t_code":false,"tools":[{"mix_ratio":[],"number":0,"name":"Extruder0","extruders":[0],"heaters":[1],"fans":[0],"x_offset":0,"y_offset":0,"z_offset":0}],"compensation_x_offset":15,"compensation_y_offset":15,"peripheral_points":3,"halfway_points":3,"calibration_factors":6,"probe_radius":85,"mesh":{"x_min":15,"x_max":500,"y_min":15,"y_max":500,"radius":85,"spacing":100},"home_first":false,"orthogonal":{"compensation":false,"height":50,"deviations":[0,0,0]},"network":{"enabled":true,"mac_address":"","name":"My Printer","password":"","ssid":"","ssid_password":"","dhcp":true,"ip":"192.168.1.20","netmask":"255.255.255.0","gateway":"192.168.1.254","protocols":{"http":true,"ftp":false,"telnet":false}},"fans":[{"name":"","value":100,"inverted":false,"frequency":500,"thermostatic":false,"heaters":[],"trigger_temperature":45,"output_pin":"out4"},{"name":"","value":100,"inverted":false,"frequency":500,"thermostatic":true,"heaters":[1],"trigger_temperature":45,"output_pin":"out5"}],"custom_settings":""}

connections.txt

@@ -0,0 +1,20 @@
+io_0 - display
+io_1 - y endstop
+io_2 - x endstop
+io_7 - bltouch
+
+z left - driver0
+z rear - driver1
+z right - driver2
+right motor - driver3
+left motor - driver4
+extruder motor - driver5 
+
+out1 - SSR
+out2 - filament heater 
+
+temp0 - bed
+temp1 - filament heater thermistor
+
+out7 - hotend fan
+out4 - layer fan

deployprobe.g

@@ -1,6 +1,4 @@
 ; deployprobe.g
-; called to deploy a physical Z probe
+; Called to deploy a physical Z probe
 ;
-; generated by RepRapFirmware Configuration Tool v3.2.3 on Mon May 24 2021 13:04:21 GMT+0200 (Central European Summer Time)
+M280 P0 S10															; Deploy the BLTouch pin
-M280 P0 S10 ; deploy BLTouch
-

homeall.g

@@ -1,25 +1,3 @@
-; homeall.g
-; called to home all axes
-;
-; generated by RepRapFirmware Configuration Tool v3.2.3 on Mon May 24 2021 13:04:21 GMT+0200 (Central European Summer Time)
-;G91                   ; relative positioning
-;G1 H2 Z5 F6000        ; lift Z relative to current position
-;G1 H1 X505 Y505 F1800 ; move quickly to X or Y endstop and stop there (first pass)
-;G1 H1 X505            ; home X axis
-;G1 H1 Y505            ; home Y axis
-;G1 X-5 Y-5 F6000      ; go back a few mm
-;G1 H1 X505 F360       ; move slowly to X axis endstop once more (second pass)
-;G1 H1 Y505            ; then move slowly to Y axis endstop
-;G90                   ; absolute positioning
-;G1 X43 Y28 F6000      ; go to first bed probe point and home Z
-;G30                   ; home Z by probing the bed
-;
-;; Uncomment the following lines to lift Z after probing
-;;G91                  ; relative positioning
-;;G1 Z5 F100           ; lift Z relative to current position
-;;G90                  ; absolute positioning
-
-;-------------------
 ; BLTouch
 M280 P0 S160           ; Precautionary alarm release
 M280 P0 S90            ; Ensure the pin is raised

homex.g

@@ -1,16 +1,3 @@
-; homex.g
-; called to home the X axis
-;
-; generated by RepRapFirmware Configuration Tool v3.2.3 on Mon May 24 2021 13:04:21 GMT+0200 (Central European Summer Time)
-;G91              ; relative positioning
-;G1 H2 Z5 F6000   ; lift Z relative to current position
-;G1 H1 X505 F1800 ; move quickly to X axis endstop and stop there (first pass)
-;G1 X-5 F6000     ; go back a few mm
-;G1 H1 X505 F360  ; move slowly to X axis endstop once more (second pass)
-;G1 H2 Z-5 F6000  ; lower Z again
-;G90              ; absolute positioning
-
-;---------------
 G91               ; relative positioning
 ;G1 H2 Z5 F6000    ; lift Z relative to current position
 G1 H1 X-625 F1800 ; move quickly to X axis endstop and stop there (first pass)

homey.g

@@ -1,16 +1,3 @@
-; homey.g
-; called to home the Y axis
-;
-; generated by RepRapFirmware Configuration Tool v3.2.3 on Mon May 24 2021 13:04:21 GMT+0200 (Central European Summer Time)
-;;G91              ; relative positioning
-;;G1 H2 Z5 F6000   ; lift Z relative to current position
-;;G1 H1 Y505 F1800 ; move quickly to Y axis endstop and stop there (first pass)
-;;G1 Y-5 F6000     ; go back a few mm
-;;G1 H1 Y505 F360  ; move slowly to Y axis endstop once more (second pass)
-;;G1 H2 Z-5 F6000  ; lower Z again
-;;G90              ; absolute positioning
-
-;---------------
 G91               ; relative positioning
 ;G1 H2 Z5 F6000    ; lift Z relative to current position
 G1 H1 Y605 F1800 ; move quickly to Y axis endstop and stop there (first pass)

homez.g

@@ -1,20 +1,3 @@
-; homez.g
-; called to home the Z axis
-;
-; generated by RepRapFirmware Configuration Tool v3.2.3 on Mon May 24 2021 13:04:21 GMT+0200 (Central European Summer Time)
-;;G91              ; relative positioning
-;;G1 H2 Z5 F6000   ; lift Z relative to current position
-;;G90              ; absolute positioning
-;;G1 X43 Y28 F6000 ; go to first probe point
-;;G30              ; home Z by probing the bed
-;;
-;;; Uncomment the following lines to lift Z after probing
-;;;G91             ; relative positioning
-;;;G1 Z5 F100      ; lift Z relative to current position
-;;;G90             ; absolute positioning
-
-
-;---------
 ; BLTouch
 M280 P0 S160           ; Precautionary alarm release
 M280 P0 S90            ; Ensure the pin is raised
@@ -26,6 +9,7 @@ G1 X150 Y150 F10000 ; go to first probe point
 G30               ; home Z by probing the bed
 
 ; Uncomment the following lines to lift Z after probing
-G91              ; relative positioning
+;G91              ; relative positioning
-G1 Z5 F100       ; lift Z relative to current position
+;G1 Z5 F100       ; lift Z relative to current position
-G90              ; absolute positioning
+;G90              ; absolute positioning
+

pause.g

@@ -1,11 +0,0 @@
-; pause.g
-; called when a print from SD card is paused
-;
-; generated by RepRapFirmware Configuration Tool v3.2.3 on Mon May 24 2021 13:04:21 GMT+0200 (Central European Summer Time)
-M83            ; relative extruder moves
-G1 E-10 F3600  ; retract 10mm of filament
-G91            ; relative positioning
-G1 Z5 F360     ; lift Z by 5mm
-G90            ; absolute positioning
-G1 X0 Y0 F6000 ; go to X=0 Y=0
-

resume.g

@@ -1,9 +0,0 @@
-; resume.g
-; called before a print from SD card is resumed
-;
-; generated by RepRapFirmware Configuration Tool v3.2.3 on Mon May 24 2021 13:04:21 GMT+0200 (Central European Summer Time)
-G1 R1 X0 Y0 Z5 F6000 ; go to 5mm above position of the last print move
-G1 R1 X0 Y0          ; go back to the last print move
-M83                  ; relative extruder moves
-G1 E10 F3600         ; extrude 10mm of filament
-

retractprobe.g

@@ -1,6 +1,4 @@
 ; retractprobe.g
-; called to retract a physical Z probe
+; Called to retract a physical Z probe
 ;
-; generated by RepRapFirmware Configuration Tool v3.2.3 on Mon May 24 2021 13:04:21 GMT+0200 (Central European Summer Time)
+M280 P0 S90													; Retract the BLTouch pin
-M280 P0 S90 ; retract BLTouch
-

sleep.g

@@ -1,5 +0,0 @@
-; sleep.g
-; called when M1 (Sleep) is being processed
-;
-; generated by RepRapFirmware Configuration Tool v3.2.3 on Mon May 24 2021 13:04:21 GMT+0200 (Central European Summer Time)
-

stop.g

@@ -1,5 +0,0 @@
-; stop.g
-; called when M0 (Stop) is run (e.g. when a print from SD card is cancelled)
-;
-; generated by RepRapFirmware Configuration Tool v3.2.3 on Mon May 24 2021 13:04:21 GMT+0200 (Central European Summer Time)
-

tfree0.g

@@ -1,5 +0,0 @@
-; tfree0.g
-; called when tool 0 is freed
-;
-; generated by RepRapFirmware Configuration Tool v3.2.3 on Mon May 24 2021 13:04:21 GMT+0200 (Central European Summer Time)
-

tpost0.g

@@ -1,7 +0,0 @@
-; tpost0.g
-; called after tool 0 has been selected
-;
-; generated by RepRapFirmware Configuration Tool v3.2.3 on Mon May 24 2021 13:04:21 GMT+0200 (Central European Summer Time)
-; Wait for set temperatures to be reached
-M116 P0
-

tpre0.g

@@ -1,5 +0,0 @@
-; tpre0.g
-; called before tool 0 is selected
-;
-; generated by RepRapFirmware Configuration Tool v3.2.3 on Mon May 24 2021 13:04:21 GMT+0200 (Central European Summer Time)
-