Duet3 6HC RatRig vcore3 config
Go to file
2021-05-28 23:17:36 +00:00
.gitignore Bed calibration possible, X,Y,Z movement possible 2021-05-28 16:23:59 +00:00
bed.g Fix bed and homing coordinates, add calibrate thermal probes, etc 2021-05-28 22:35:11 +00:00
config.g Fix bed and homing coordinates, add calibrate thermal probes, etc 2021-05-28 22:35:11 +00:00
deployprobe.g Fix bed and homing coordinates, add calibrate thermal probes, etc 2021-05-28 22:35:11 +00:00
homeall.g Fix bed and homing coordinates, add calibrate thermal probes, etc 2021-05-28 22:35:11 +00:00
homex.g Fix bed and homing coordinates, add calibrate thermal probes, etc 2021-05-28 22:35:11 +00:00
homey.g Fix bed and homing coordinates, add calibrate thermal probes, etc 2021-05-28 22:35:11 +00:00
homez.g Fix bed and homing coordinates, add calibrate thermal probes, etc 2021-05-28 22:35:11 +00:00
pause.g pmso mix generated + ratrig + pmso 2021-05-26 21:17:05 +00:00
README.md Add useful links to README 2021-05-28 23:17:36 +00:00
resume.g pmso mix generated + ratrig + pmso 2021-05-26 21:17:05 +00:00
retractprobe.g Fix bed and homing coordinates, add calibrate thermal probes, etc 2021-05-28 22:35:11 +00:00
sleep.g pmso mix generated + ratrig + pmso 2021-05-26 21:17:05 +00:00
stop.g pmso mix generated + ratrig + pmso 2021-05-26 21:17:05 +00:00
tfree0.g pmso mix generated + ratrig + pmso 2021-05-26 21:17:05 +00:00
tpost0.g pmso mix generated + ratrig + pmso 2021-05-26 21:17:05 +00:00
tpre0.g pmso mix generated + ratrig + pmso 2021-05-26 21:17:05 +00:00

Duet 3 6HC

HW Config

Pins

IO

io_0 - display io_1 - y endstop io_2 - x endstop io_7 - bltouch

Stepper motors

z left - driver0 - motion backwards (looking from the back of the printer) z rear - driver1 - motion backwards z right - driver2 - motion backwards right motor - driver3 - Y - motion forwards (looking from the back of the printer) left motor - driver4 - X - motion forwards extruder motor - driver5 - motion forwards

Outputs (24V)

Heating elements

out1 - SSR Bed out2 - Hotend

Fans

out7 - hotend fan out4 - layer fan

Temperature probes

temp0 - Bed thermistor temp1 - Hotend thermistor

GCode library RatRig vcore3 docs