3dprinting/duet_vcore3
3dprinting/duet_vcore3
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Bug fixes, new calibration values

Browse Source 
Fix typo in config "extra -"
Calibrate accelerometer values
Calibrate z offset
This commit is contained in:
pedro 2023-04-02 11:57:23 +01:00
parent ab66b295dd
commit afe26f9ee5
1 changed files with 4 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
config.g
View File

@ -21,7 +21,7 @@ M92 X80.00 Y80.00 Z1600.00 E794 ; set steps per mm
M566 X400.00 Y400.00 Z6.00 E120.00 P1 ; set maximum instantaneous speed changes (mm/min)
M203 X10800.00 Y10800.00 Z1000.00 E3600.00 ; set maximum speeds (mm/min)
M201 X3000 Y3000 Z100.00 E3600.00 ; set accelerations (mm/s^2)
M906 X1300 Y1300 Z800 E800 I20 ; set motor currents (mA) and motor idle factor in per cent
M906 X1500 Y1500 Z800 E800 I20 ; set motor currents (mA) and motor idle factor in per cent
M84 S30 ; Set idle timeout
; Axis Limits
@ -39,7 +39,7 @@ M558 P9 C"^io7.in" H5 F300 T10000 A5 S0.05 R0.2 ; set Z probe type to bltouch
;; Pay special attention to the values bellow on G31, the Z value needs to be validated for your printer
;; Start with something like 0.5
;; Documentation available: https://duet3d.dozuki.com/Wiki/Test_and_calibrate_the_Z_probe
G31 P500 X-35 Y-0.5 Z3.075 ; set Z probe trigger value, offset and trigger height (90 ºc, 15m after reaching temp)
G31 P500 X-35 Y-0.5 Z2.900 ; set Z probe trigger value, offset and trigger height (90 ºc, 15m after reaching temp)
M671 X-6:250:503 Y0:511:0 S100 ; define positions of Z leadscrews or bed levelling screws
M557 X5:465 Y5:465 P20 ; define 20x20 mesh grid
@ -51,7 +51,6 @@ M307 H0 B0 S1.00 ; disable bang-bang mode for
M140 H0 ; map heated bed to heater 0
M143 H0 S120 ; set temperature limit for heater 0 to 120C
;; HotEnd
M308 S1 P"temp1" Y"thermistor" T100000 B4725 C7.060000e-8 A"Hotend" ; configure sensor 1 as thermistor on pin temp1
M950 H1 C"out2" T1 ; create nozzle heater output on out2 and map it to sensor 1
M307 H1 B0 S1.00 ; disable bang-bang mode for heater and set PWM limit
@ -62,7 +61,7 @@ M950 F0 C"out7" Q500 ; create fan 0 on pin out7 an
M106 P0 C"Hotend fan" S1 H1 T45 ; set fan 0 value. Thermostatic control is turned on
M950 F1 C"out4" Q20 ; create fan 1 on pin out4
;M950 F1 C"!out4+out4.tach" Q25000 ; create fan 1 on pin out4 pwm fan (4 wires)
M106 P1 C"Layer fan" S0 H-1 -L255 ; set fan 1 value. Thermostatic control is turned off
M106 P1 C"Layer fan" S0 H-1 L255 ; set fan 1 value. Thermostatic control is turned off
; Lights
M950 P2 C"out8" ; create output for lighning via DC DC SSR
@ -80,7 +79,7 @@ M591 D0 P5 C"io3.in" R30:125 E5.0 S1 ; Duet3D laser sensor for ext
;; More info: regarding sensor orientation: https://www.dropbox.com/s/hu2w5mk57l4zqpg/Accelerometer%20Orientation.pdf
;; Possible orientations 01,02,05,06
M955 P0 C"spi.cs3+spi.cs2" I01 S1344 R10; all wires connected to temperature daughter board connector, Orientation 01, Sampling rate 1344, 10b resolution
M593 P"zvd" F33 ; use ZVD input shaping to cancel ringing at 214Hz
M593 P"ei3" F38 ; use P "shaper" input shaping to cancel ringing at center 38Hz
;M593 P"none" ; disable input shaping
;M593 P"custom" H0.4:0.7 T0.0135:0.0135 ; use custom input shaping