Commit Graph

86 Commits

Author SHA1 Message Date
88638bd30f Update README.md with latest info 2022-02-14 17:23:07 +00:00
d931f49b67 Tune homing and bed parameters 2022-02-14 17:03:42 +00:00
5a747e0740 New defaults for EVA 2.2 2022-02-01 17:54:16 +00:00
765dbe268c Merge branch 'master' of g.lgeex.com:3dprinting/duet_vcore3 2021-07-18 22:05:21 +01:00
69d778201b Merge branch 'master' of g.lgeex.com:3dprinting/duet_vcore3 2021-07-18 22:05:08 +01:00
01d5f2b4f2 Merge branch 'master' of g.lgeex.com:3dprinting/duet_vcore3 2021-07-18 20:37:56 +01:00
521d446888 Enable filament sensor, macros cleanup
wq
2021-07-18 20:37:02 +01:00
149045bcec Enable filament sensor 2021-07-18 20:36:39 +01:00
d48ea62f2b Revert bed mesh settings 2021-06-29 19:19:27 +01:00
eefdd39236 Add setting for 1.8 x y steppers, update README.md 2021-06-28 21:01:21 +01:00
881990dcd5 Set min, max for extra safety (leds) 2021-06-27 23:37:23 +01:00
5bad296a0e Tune bed probing after nozzle change 2021-06-27 18:22:12 +01:00
73e398c2fd General improvements, E steps, currents, Z probe offset 2021-06-20 19:53:54 +01:00
65fb7e50e0 Fix: speed and accell settings 2021-06-17 00:01:48 +01:00
2f8b187303 Update readme with stepper specs 2021-06-16 23:21:34 +01:00
bf0950c9b9 Update motor current to 85% of max current 2021-06-16 23:19:27 +01:00
2f95b4260d Revert x y min settings 2021-06-16 22:33:49 +01:00
7833cb37da Update min x y 2021-06-16 22:31:54 +01:00
2c6201e844 Merge branch 'master' of g.lgeex.com:3dprinting/duet_vcore3 2021-06-16 22:18:44 +01:00
7ecfa07edc Improvements to homeall, smoother 2nd pass 2021-06-16 22:17:15 +01:00
0b162053bb Improvements to homeall, smoother 2nd pass 2021-06-16 22:10:07 +01:00
89b2f192e9 Disable filament sensor 2021-06-16 22:05:57 +01:00
5791f108b1 Improve homeall 2021-06-16 21:57:44 +01:00
dc6db04ebc Auto load weight map after homing Z 2021-06-16 21:28:28 +01:00
79a7ec747c Define stepper parameter
* Decrease max current in steppers
* Decrease max acceleration for x y z
2021-06-16 19:06:07 +00:00
94bf56688a Add support to duet laser filament sensor 2021-06-15 23:09:18 +00:00
3351394c4f Merge branch 'master' of g.lgeex.com:3dprinting/duet_vcore3 2021-06-15 19:06:24 +00:00
820de279bd mend 2021-06-15 19:06:10 +00:00
52ab455de6 mend 2021-06-15 00:22:39 +01:00
439d7b4048 Fix and improve bed sensing
Fixing:
* bed screws location
* bed screws order
* X max 510 -> 500

Improvements:
* Probing points
* Home all speed
* Probing speed (decreased speed for increased accuracy)
2021-06-15 00:05:44 +01:00
60629756fe Tune E-steps, tune bed config 2021-06-13 23:54:09 +01:00
a49c0a7ce9 Adjust bed probing 2021-06-13 21:11:15 +00:00
b149c189f2 Decrease acceleration due to ghosting 2021-06-12 23:38:02 +00:00
e95fbd331a Move lights mgt to main page, change warm up tems for petg 2021-06-12 23:40:40 +01:00
7b6037d91a Enable pressure advance, tune Z, tune E steps 2021-06-12 23:27:58 +01:00
2773198f50 Add comment with details for future pwm fans
After advice from duet forums, we start preparing for the PWM fans
everywhere.

Details [here](https://forum.duet3d.com/topic/23669/pmw-fan-inversed-output/3)
2021-06-12 14:41:59 +00:00
14a04d16c0 Merge branch 'master' of g.lgeex.com:3dprinting/duet_vcore3 2021-06-12 13:09:12 +01:00
af4171b656 Merge branch 'master' of g.lgeex.com:3dprinting/duet_vcore3 2021-06-12 13:08:52 +01:00
eeb6aca0a3 Merge branch 'master' of g.lgeex.com:3dprinting/duet_vcore3 2021-06-11 13:59:26 +00:00
63fd4e487a Update README with git section 2021-06-11 13:59:10 +00:00
8be2c33c5f Merge branch 'master' of g.lgeex.com:3dprinting/duet_vcore3 2021-06-11 14:42:39 +01:00
82b63699b6 Improve homeall.g, aiming for a smoother homing 2021-06-11 14:42:18 +01:00
b7c7d4f9b8 Fine tune E steps 2021-06-09 20:39:36 +00:00
e6d25ae5a4 Improve homeall.g, aiming for a smoother homing 2021-06-08 22:07:21 +00:00
0e84036b5a Update E steps config after calibration, update readme 2021-06-08 17:59:23 +01:00
1c82956e54 Increse number of probes for bed leveling (10x10) 2021-06-08 00:38:39 +01:00
1e203738f8 Add new entries to the tested macros list 2021-06-06 20:37:25 +00:00
d25c4c2aa3 Instructions update after making the repo public 2021-06-06 19:06:15 +00:00
d4490ce7d3 Fix: Stepper direction, endstop high position for y, homing settings 2021-06-06 18:58:36 +01:00
093927ca94 Fix conflict 2021-06-06 16:19:51 +01:00