89b2f192e9
Disable filament sensor
2021-06-16 22:05:57 +01:00
5791f108b1
Improve homeall
2021-06-16 21:57:44 +01:00
dc6db04ebc
Auto load weight map after homing Z
2021-06-16 21:28:28 +01:00
79a7ec747c
Define stepper parameter
...
* Decrease max current in steppers
* Decrease max acceleration for x y z
2021-06-16 19:06:07 +00:00
94bf56688a
Add support to duet laser filament sensor
2021-06-15 23:09:18 +00:00
3351394c4f
Merge branch 'master' of g.lgeex.com:3dprinting/duet_vcore3
2021-06-15 19:06:24 +00:00
820de279bd
mend
2021-06-15 19:06:10 +00:00
52ab455de6
mend
2021-06-15 00:22:39 +01:00
439d7b4048
Fix and improve bed sensing
...
Fixing:
* bed screws location
* bed screws order
* X max 510 -> 500
Improvements:
* Probing points
* Home all speed
* Probing speed (decreased speed for increased accuracy)
2021-06-15 00:05:44 +01:00
60629756fe
Tune E-steps, tune bed config
2021-06-13 23:54:09 +01:00
a49c0a7ce9
Adjust bed probing
2021-06-13 21:11:15 +00:00
b149c189f2
Decrease acceleration due to ghosting
2021-06-12 23:38:02 +00:00
e95fbd331a
Move lights mgt to main page, change warm up tems for petg
2021-06-12 23:40:40 +01:00
7b6037d91a
Enable pressure advance, tune Z, tune E steps
2021-06-12 23:27:58 +01:00
2773198f50
Add comment with details for future pwm fans
...
After advice from duet forums, we start preparing for the PWM fans
everywhere.
Details [here](https://forum.duet3d.com/topic/23669/pmw-fan-inversed-output/3 )
2021-06-12 14:41:59 +00:00
14a04d16c0
Merge branch 'master' of g.lgeex.com:3dprinting/duet_vcore3
2021-06-12 13:09:12 +01:00
af4171b656
Merge branch 'master' of g.lgeex.com:3dprinting/duet_vcore3
2021-06-12 13:08:52 +01:00
eeb6aca0a3
Merge branch 'master' of g.lgeex.com:3dprinting/duet_vcore3
2021-06-11 13:59:26 +00:00
63fd4e487a
Update README with git section
2021-06-11 13:59:10 +00:00
8be2c33c5f
Merge branch 'master' of g.lgeex.com:3dprinting/duet_vcore3
2021-06-11 14:42:39 +01:00
82b63699b6
Improve homeall.g, aiming for a smoother homing
2021-06-11 14:42:18 +01:00
b7c7d4f9b8
Fine tune E steps
2021-06-09 20:39:36 +00:00
e6d25ae5a4
Improve homeall.g, aiming for a smoother homing
2021-06-08 22:07:21 +00:00
0e84036b5a
Update E steps config after calibration, update readme
2021-06-08 17:59:23 +01:00
1c82956e54
Increse number of probes for bed leveling (10x10)
2021-06-08 00:38:39 +01:00
1e203738f8
Add new entries to the tested macros list
2021-06-06 20:37:25 +00:00
d25c4c2aa3
Instructions update after making the repo public
2021-06-06 19:06:15 +00:00
d4490ce7d3
Fix: Stepper direction, endstop high position for y, homing settings
2021-06-06 18:58:36 +01:00
093927ca94
Fix conflict
2021-06-06 16:19:51 +01:00
6726f80727
Fix: Y Stepper motion, it was inverted
2021-06-06 16:18:15 +01:00
95348794dc
Fix: Y Stepper motion, it was inverted
2021-06-06 15:10:34 +00:00
879e7a590a
Tune stepper parameters, noise reduction 1st try
2021-06-06 12:57:26 +01:00
703d1d8328
Merge branch 'master' of g.lgeex.com:3dprinting/duet_vcore3
2021-06-06 12:21:50 +01:00
812f24d1cd
Tune Z probre, add warning to conf, set layer frequency
2021-06-06 12:21:38 +01:00
10f3ce060e
Update readme, add info regarding backplate and hw links
2021-06-05 22:41:09 +00:00
15183926fd
Renamed lights macro
2021-06-05 21:39:58 +00:00
440f51008e
Update readme with intro section
2021-06-05 21:37:00 +00:00
047265c50f
Change README, add new new macros to the tested list
2021-06-05 21:08:59 +00:00
77597594ce
Set target tem for hotend to 250C
2021-06-05 20:59:16 +00:00
a50ea27807
Set calibration point for hotend at 275C
2021-06-05 20:30:36 +00:00
f0f56de8b3
Update README.md
2021-06-05 20:06:23 +00:00
3309acd1a6
Update READM.md
2021-06-05 19:59:12 +00:00
2887f4e4da
Set pin tune parameters for Vcore3
2021-06-05 19:37:21 +01:00
9b82d9c0a6
Fix: Lighting probe assignement
2021-06-05 17:55:44 +00:00
f8ac02a1a0
update gitignore
2021-06-04 23:05:18 +00:00
b0288dccc5
Add LED control and several other macros
2021-06-03 22:09:42 +00:00
root
b86b210c9b
Fix primary bed probing points
2021-05-30 11:49:38 +00:00
root
2cb30bbf32
Define calibration mesh within bed boundaries
2021-05-30 11:42:56 +00:00
94d6a867bd
Change probe offset; trigreer bloutch reset before homing
2021-05-30 11:24:13 +00:00
945eacadbb
Change tool max temp, set parameter for layer fan
2021-05-30 10:50:14 +00:00
