pedro
7f3e535160
Move Accelleromenter config to the end of the config file
...
The accelormeter is not always connected thus and error is produced, I prefer
to have the error after all configs are loaded.
2023-04-02 21:22:17 +01:00
pedro
afe26f9ee5
Bug fixes, new calibration values
...
Fix typo in config "extra -"
Calibrate accelerometer values
Calibrate z offset
2023-04-02 11:57:23 +01:00
pedro
ab66b295dd
Tunes
...
* Tune ressonance frequency
* Tune stepper currents
* Tune nozzle offset (new nozzle)
2022-03-14 20:20:26 +00:00
pedro
25b0f025ab
Duet VCore 3 V1.9RC1
...
* Tuned motor currents
* Tuned zprobe due to new nozzle
* Added configuration for input shapping
* Tuned z homing on homez and homeall
2022-03-05 23:30:29 +00:00
pedro
064b6155ea
Add resurrect file
2022-02-22 02:01:50 +00:00
pedro
3256d6d5f8
Fix merge conflit
2022-02-21 14:07:05 +00:00
pedro
568fae4b39
Multiple fixe: accell, bed, filament sensor, tune e-steps
...
Add support to accelerometer
Tune probe offset on Z
Tune extrusor steps
Add accel. files to .gitignore
2022-02-21 13:49:01 +00:00
pedro
514d6e16ab
Multiple fixe: accell, bed, filament sensor, tune e-steps
...
Add support to accelerometer
Tune probe offset on Z
Tune extrusor steps
Add accel. files to .gitignore
2022-02-21 13:42:29 +00:00
pedro
40d7c2aa86
Update reset info
2022-02-14 18:31:27 +00:00
pedro
8075b6fef8
Add board diagram
2022-02-14 18:29:09 +00:00
pedro
a5a6e1d4e2
Fix stepper info
2022-02-14 18:27:05 +00:00
pedro
0e07d4d669
Merge branch 'master' of g.lgeex.com:3dprinting/duet_vcore3
2022-02-14 17:25:48 +00:00
pedro
7dc1ad1f7c
Update README.md with latest info
2022-02-14 17:25:29 +00:00
pedro
88638bd30f
Update README.md with latest info
2022-02-14 17:23:07 +00:00
pedro
d931f49b67
Tune homing and bed parameters
2022-02-14 17:03:42 +00:00
pedro
5a747e0740
New defaults for EVA 2.2
2022-02-01 17:54:16 +00:00
pedro
765dbe268c
Merge branch 'master' of g.lgeex.com:3dprinting/duet_vcore3
2021-07-18 22:05:21 +01:00
pedro
69d778201b
Merge branch 'master' of g.lgeex.com:3dprinting/duet_vcore3
2021-07-18 22:05:08 +01:00
pedro
01d5f2b4f2
Merge branch 'master' of g.lgeex.com:3dprinting/duet_vcore3
2021-07-18 20:37:56 +01:00
pedro
521d446888
Enable filament sensor, macros cleanup
...
wq
2021-07-18 20:37:02 +01:00
pedro
149045bcec
Enable filament sensor
2021-07-18 20:36:39 +01:00
pedro
d48ea62f2b
Revert bed mesh settings
2021-06-29 19:19:27 +01:00
pedro
eefdd39236
Add setting for 1.8 x y steppers, update README.md
2021-06-28 21:01:21 +01:00
pedro
881990dcd5
Set min, max for extra safety (leds)
2021-06-27 23:37:23 +01:00
pedro
5bad296a0e
Tune bed probing after nozzle change
2021-06-27 18:22:12 +01:00
pedro
73e398c2fd
General improvements, E steps, currents, Z probe offset
2021-06-20 19:53:54 +01:00
pedro
65fb7e50e0
Fix: speed and accell settings
2021-06-17 00:01:48 +01:00
pedro
2f8b187303
Update readme with stepper specs
2021-06-16 23:21:34 +01:00
pedro
bf0950c9b9
Update motor current to 85% of max current
2021-06-16 23:19:27 +01:00
pedro
2f95b4260d
Revert x y min settings
2021-06-16 22:33:49 +01:00
pedro
7833cb37da
Update min x y
2021-06-16 22:31:54 +01:00
pedro
2c6201e844
Merge branch 'master' of g.lgeex.com:3dprinting/duet_vcore3
2021-06-16 22:18:44 +01:00
pedro
7ecfa07edc
Improvements to homeall, smoother 2nd pass
2021-06-16 22:17:15 +01:00
pedro
0b162053bb
Improvements to homeall, smoother 2nd pass
2021-06-16 22:10:07 +01:00
pedro
89b2f192e9
Disable filament sensor
2021-06-16 22:05:57 +01:00
pedro
5791f108b1
Improve homeall
2021-06-16 21:57:44 +01:00
pedro
dc6db04ebc
Auto load weight map after homing Z
2021-06-16 21:28:28 +01:00
pedro
79a7ec747c
Define stepper parameter
...
* Decrease max current in steppers
* Decrease max acceleration for x y z
2021-06-16 19:06:07 +00:00
pedro
94bf56688a
Add support to duet laser filament sensor
2021-06-15 23:09:18 +00:00
pedro
3351394c4f
Merge branch 'master' of g.lgeex.com:3dprinting/duet_vcore3
2021-06-15 19:06:24 +00:00
pedro
820de279bd
mend
2021-06-15 19:06:10 +00:00
pedro
52ab455de6
mend
2021-06-15 00:22:39 +01:00
pedro
439d7b4048
Fix and improve bed sensing
...
Fixing:
* bed screws location
* bed screws order
* X max 510 -> 500
Improvements:
* Probing points
* Home all speed
* Probing speed (decreased speed for increased accuracy)
2021-06-15 00:05:44 +01:00
pedro
60629756fe
Tune E-steps, tune bed config
2021-06-13 23:54:09 +01:00
pedro
a49c0a7ce9
Adjust bed probing
2021-06-13 21:11:15 +00:00
pedro
b149c189f2
Decrease acceleration due to ghosting
2021-06-12 23:38:02 +00:00
pedro
e95fbd331a
Move lights mgt to main page, change warm up tems for petg
2021-06-12 23:40:40 +01:00
pedro
7b6037d91a
Enable pressure advance, tune Z, tune E steps
2021-06-12 23:27:58 +01:00
pedro
2773198f50
Add comment with details for future pwm fans
...
After advice from duet forums, we start preparing for the PWM fans
everywhere.
Details [here](https://forum.duet3d.com/topic/23669/pmw-fan-inversed-output/3 )
2021-06-12 14:41:59 +00:00
pedro
14a04d16c0
Merge branch 'master' of g.lgeex.com:3dprinting/duet_vcore3
2021-06-12 13:09:12 +01:00
pedro
pedro